Installation Grohe (Groe)

I’ll tell you from my experience a month ago, I just didn’t go to this page before. We bought a hanging toilet a month ago, and for it we had to buy an installation. They chose the German Groe, they speak well of her, they say, reliable, like a tank. All of us brought and put the guys from the store. The seller docked with the masters, they all did. After a couple of days, the regime of continuous flushing stopped turning off, water pours and pours. I did not see anything good on the networks, but I did not find instructions. I thought that her masters were taken. I had to call the same men, they came a word, and at the moment all corrected. They showed me how to switch everything correctly, but by the way, I did just that. I ask what happened? They laugh, they say that everything is fine, just the drain is clogged. And what can a new drain clog? Something wrong. They left, and I found out from plumber friends that, most likely, the instruction itself was forgotten in the tank! They don’t need it, they know everything by heart, but they did not check the contents of the tank. It turns out that often the instruction is hidden in the tank, but not all of it is removed from there. It then soaks and prevents the opening of the hole. Here the water runs. Maybe it's a bike, or maybe this really happens.

everything is fine

not marked

How did Groe's angular installation help us out! This is precisely in the stream of the main law of sellers: “Everything is for the buyer!”. Many of our friends already have a bidet or a combination of a toilet and a bidet, but all have either a floor-mounted version or a flat wall. We don’t want to break the wall of the bathroom and combine it with the bath - there is already no place because of the shower cabin. Even the washing machine in our hallway is standing. Purely by chance we learned that there are installations with corner mounting. The choice was made on Groya, even for the simple reason that they do not have their own toilet in the kit, and we like the Turkish Vitra. They could not do the installation themselves, but the masters did it in the best possible way. Everything is OK now!

Easy installation even with such a complex design

no cons

I have a Groe system - installation plus a hanging “pot”. For a long time I was going to install a suspension system, I chose Groe because of good reviews about German plumbing and because they have an angular installation option. For my bathroom, this is simply necessary, only the corner option will fit in there.When I got to grips with familiarizing with the prices of plumbing and things for it in our city, I came across the offer of a cheap installation of Groe, half cheaper than that of the neighbors in the shops. Well, how can you save on installation design?

Clearly on materials for the frame and legs. For example, I can distinguish linden bullshit from the original for mixers - counterfeit is always twice as easy, there is almost no copper there. That’s a closer look at the cheap installation. It seems that it is painted with a signature blue color, and branded three waves are applied. But I was immediately confused by the size of the profile section of the frame - 30 to 30 mm thick like a deuce. I think this is not like the Germans. They give a guarantee of 400 kg, they always have a margin of safety, foolproof, as they say. I looked in another store - here is the result: with the naked eye it is noticeable that the profile is there - attention !!! - 50 to 50 mm, well, and the wall is at least 4. Turning to technical terminology, I summarize: Groe has installations with an enlarged section of the profile, and this is justified by those 400 kg that need to be sustained. Do not fall for the cheap at the expense of strength and quality. I have not yet begun to deal with the tank, I already understood everything from the profile. I bought a normal “native” configuration and for a year now I don’t know grief.

increased strength

no cons

Six months ago, my wife and I immediately replaced the plumbing as part of the overhaul of the apartment. Now we have a hanging toilet with a bidet function. Before the purchase, my wife convinced me that for us a bidet is like air, we have two daughters, girls and women are growing, they say, with the help of a bidet it will be easier to carry out our hygiene procedures. What I advise - a toilet and a bidet, or a toilet with a bidet function - take those on which, as they say, "the soul will lie down."

But the installation - only Groe! The Germans are great, so the installation system and height adjustment issues are thought out. I myself put all this out and connected, the instruction was very detailed on the assembly from the company. I’ll just advise - they have a very tricky flush system, often the continuous flush function works, you don’t need it, the water flow is superfluous.

Frame strength, ease of use and cleaning

Unexpected flush function

Friends, I specially found this page, I want to share the joy! So my dream came true - we installed a hanging toilet with a bidet function. I looked at him in the "Housing Question" and sunk precisely on their design. By the way, my husband is well done - he didn’t even have to saw him, he immediately agreed.

We visited the store, the seller showed configuration options, gave us a layout for the costs, including delivery, installation and connection. We are not particularly bland, so it was necessary to compare all the costs and our capabilities. Thanks to the seller, he indicated to us that in addition to the store configuration and installation costs, it is necessary to provide drywall for the box, profiles, tile and its laying on a false wall, etc. The nth amount also came running.

Plumbing was purchased from different manufacturers - a Turkish Vitra wall-hung toilet with a bidet function, and a German installation by Grohe. Against the background of Polish and Turkish installations, it is like heaven and earth! Real German quality, durability, height adjustment. And the price is almost the same.

Design, style, hygiene

Not marked