In our rating you can find construction staplers of manual, electric and pneumatic type. We hope this will simplify your choice, provide a high-quality result during operation and will not allow you to spend money in vain. The material is based on customer reviews, who have already tested the product, and the characteristics of the tool.
Content:
The best manual mechanical construction staplers
Manual construction staplers are not the most productive tool and you can pierce them with not only thick materials, but they differ in maneuverability and autonomy. It is easy to work with them at height and far from an electric network.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Inforce 06-09-42 | Miles TS-5580 | COBALT 240-669 | |||||||
| Size of brackets, mm | 4-14 | 6-10 | 4-14 | ||||||
| Dimensions, mm | 155x135x35 | 155x139x29 | 160x100x25 | ||||||
| Weight, kg | 0,52 | 0,45 | 0,6 | ||||||
| Impact force adjustment |  |
 |
|
||||||
| Staple replacement indicator | |
|
|
||||||
Inforce 06-09-42
All-metal stapler with manual transmission. During periods of inactivity, the cocking handle is fixed with a steel loop so that the tool does not work spontaneously and is more compact.
+ Pros of Inforce 06-09-42
- Bright colors help not to lose it in the workplace.
- It easily penetrates the film, isolon and carpet.
- There is an adjustment of the impact force for different surface densities and upholstery thicknesses.
- Staples from 4 to 14 mm are inserted into the store.
- Easy stroke brisk.
- Hot spring.
- Can be disassembled to remove jammed staples.
- It is assembled without cracks and does not hang, there are no burrs on the case.
- Cons Inforce 06-09-42
- The handle is completely metal, without a seal, so it presses the hand faster.
- When hit on a knot, it bends the staples.
- The impact force regulator is not sold separately - when this mechanism weakens or the spring is lost, the entire stapler will become useless due to non-repairability.
- The end of the consumable can be found only by opening the cover.
Output. The tool is rated mechanical stapler due to its robust design and affordable price. This is a good budget option for home use.
Miles TS-5580
Indian brand produced in their own country. The stapler is very small and weighs 450 grams. It has a non-collapsible design and supports work with brackets 6-10 mm in size.
+ Pros of Miles TS-5580
- Attractive price.
- The elongated nose will allow you to drive the bracket in a remote place.
- The indicator shows how many consumables are left in the clip.
- Rubber-plastic coating of the handle increases the comfort of using the tool.
- Good build quality and durable case - if it falls, it will not break.
- Easy stroke of the handle - it will not be difficult for girls to work with it.
- Cons Miles TS-5580
- The case does not understand - if something flies inside, then it is impossible to repair.
- There is no adjustment of impact force, so it is more suitable for medium-density materials.
- In chipboard, it will be able to hammer a bracket measuring only 8 mm.
- For some, the plastic overlay disappears from the bottom.
- There is no trigger lock.
Output. The stapler has a comfortable grip with a rubberized part and a soft mating palm rest. Compact size fits easily in your pocket.
COBALT 240-669
Russian tool with spring spring and adjustment in the lower part of the body. The store immediately holds 150 staples for long use without stopping.
+ Pros COBALT 240-669
- Almost no single shots.
- A powerful blow even with a weak spring tension - a 14 mm bracket is included in polycarbonate.
- If you "clamp" the bracket, then it is not necessary to disassemble - with the next blow, the damaged one also flies out.
- Almost no recoil in the hand.
- Convenient change of expendable elements.
- Cons COBALT 240-669
- There is no fuse to protect against accidental pressing and tripping in your pocket.
- There is no indicator for replacing brackets.
- It will be hard for a woman.
- The handle staggers a little.
- There are double shots when two brackets are driven in at once.
Output. A wide erect handle with soft pad and impact force adjustment, as well as interaction with brackets from 4 to 14 mm, will allow fixing a large number of various thin materials.
The best cordless construction staplers
Such a tool works by driving the percussion mechanism with a battery-powered engine. This eases the burden on the hands of the master and allows you to work longer without interruptions. But working time is limited by battery capacity.
Such staplers are available for various types of staples and nails (U-shaped, T-shaped, I-shaped), which makes them applicable for furniture production or construction. Here is a ranking of the best electric staplers, whose models are equipped with a battery and have a large number of positive reviews in terms of reliability.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| DeWALT DCN 692P2 | AEG B16N18-0 451533 | Ryobi ONE + R18N18G0 | |||||||
| Nail Length, mm | 50-90 | 19-65 | 16-51 | ||||||
| Weight, kg | 4,1 | 3,1 | 2,93 | ||||||
| The number of batteries in the kit, pcs | 2 | not | not | ||||||
| Magazine capacity (nails), pcs | 55 | 105 | 105 | ||||||
| Type of nails | D34 | SK64 / T | 47 / F / 055/049/300 / J / SK50 | ||||||
| Impact force adjustment | |
|
|
||||||
DeWALT DCN 692P2
American battery stapler with assembly in Europe. Equipped with a fully rubberized handle and two batteries with a capacity of 5.0 Ah *.
+ Pros of DeWALT DCN 692P2
- Two batteries are included.
- It can hammer nails from 50 to 90 mm long.
- The store holds up to 55 pieces of nails.
- There are two modes (single and high-speed) for different amounts of work.
- It can be used at temperatures from -20 to +50 degrees.
- Clogging depth is adjustable by the operator.
- An oblique store does not interfere with access to inaccessible places.
- When the store is empty, the inclusion is blocked.
- If the nail is jammed, then on the case provides functionality for removing it.
- Cons DeWALT DCN 692P2
- It weighs 4.1 kg, so when mounting on the ceiling, your hands get tired quickly.
- It works well only with high-quality nails - if you buy cheap nails, they will not clog up to the end, but the wedges must be wedged inside.
- Over time, the back cover loosens.
- It is very powerful, so when working with soft wood (aspen, spruce) you need to adjust the impact, otherwise it will sink the hat deeply.
Output. A professional model for everyday work on a construction site. Thanks to brushless motor technology withstands continuous use. Suitable for fastening thick boards, beams, plywood, skirting boards and cornices.
AEG B16N18-0 451533
Battery stapler from the German brand. The store has a vertical straight feed and holds 105 nails. Impact strength is controlled by a rotary switch on the housing with an intuitive designation.
+ Pros AEG B16N18-0 451533
- Brushless motor technology extends its life.
- Makes up to 120 beats per minute.
- Up to 1400 nails can be driven on a single charge of a 5.0 Ah battery.
- LED backlighting makes it easy to work in poorly lit areas.
- Correct weight distribution and convenient button layout.
- Cons AEG B16N18-0 451533
- Sold without battery and charger adapter.
- Due to the vertical position of the store, it can be difficult to get to a bottleneck in order to perform a strike.
- Bulky and weighs more than 3 kg.
Output. An excellent stapler, thanks to working with nails with a length of 19-65 mm, is well suited for fast fixing of both thin and thick materials.
Ryobi ONE + R18N18G0
Stapler with rubberized handle and bottom battery. It has two diodes for illumination and a wheel for adjusting the impact force in the front of the case.
+ Pros Ryobi ONE + R18N18G0
- Easy switching from single to serial mode.
- A clip for carrying a tool on a belt.
- On a single battery charge of 4.0 Ah, you can hammer up to 1600 nails of maximum length.
- It can work with consumables 16-51 mm long.
- Performs up to 60 beats per minute.
- 500 nails 32 mm long are included in the package.
- Almost no recoil after hitting.
- Works well after driving over 20,000 nails.
- Fuse from accidental shots.
- Cons Ryobi ONE + R18N18G0
- Implemented without battery and power adapter.
- A vertical magazine makes it difficult to fasten materials through small holes.
- Because of the weight of 3 kg, you can’t wear it on your belt for a long time.
- If inaccurate, it leaves a deep mark on the striker.
- Demanding on the quality of nails.
Output. This cordless stapler will be the best for mounting lining. Thanks to the high-speed feed mode, fasteners can be quickly made. During the transfer of workpieces, the tool can be hung on the belt for a special clip.
The best staple guns
Air-operated staple guns feature high performance. The force of the impact is huge, and the internal mechanism does not need much time to repeat the cycle. But the work of the tool is limited by the length of the hose and the need to connect the compressor to the network, so they are used more in production and in private workshops with a stationary workplace.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Metabo DKG 80/16 | Sumake N-50 | FUBAG S1216 | |||||||
| Size of brackets, mm | 4-16 | 25-50 | 6-16 | ||||||
| Weight, kg | 0,78 | 2,65 | 0,87 | ||||||
| Pressure, atm. | 7 | 8 | 7 | ||||||
| Diameter of the air union, inch | 1 / 4F | 3 / 4F | 1 / 4F | ||||||
| Type of staples | 80 / GA21 | 114 / GA16 / N | 80 / GA21 | ||||||
| Average air consumption, l / shock | 0,34 | 2,7 | 0,5 | ||||||
Metabo DKG 80/16
Pneumatic stapler with air consumption of 0.34 l per blow. A compressor for 7 atmospheres is enough for operation. Can clog staples 4-16 mm in size.
+ Pros of Metabo DKG 80/16
- The handle reduces the temperature transfer from heating the housing and vibration.
- It is delivered in a convenient case with keys for disassembly and cleaning, as well as a container with oil.
- Easy and convenient for long manipulations.
- Window to control the balance of staples in the store.
- Able to hammer the bracket even in a knot at a pressure of 5.5 bar.
- Random Start Lock
- Cons Metabo DKG 80/16
- It needs brackets of this particular manufacturer or Sumake - a special size.
- On consumables with a length of 16 mm, you can not strongly press the case to the surface, otherwise it can make a blank shot.
- The fuse is quite light and can be removed spontaneously.
Output. This stapler is suitable for a small furniture workshop. The supported staple size from 4 to 16 mm allows fastening materials of various thicknesses.
Sumake N-50
This is one of the most powerful pneumatic tools from a Taiwanese manufacturer. It can support work with brackets from 25 to 50 mm long and cross section up to 1.6 mm. There is a job in line.
+ Pros of Sumake N-50
- The rubberized handle fits comfortably in your hand.
- The store fits up to 100 staples, which allows you to work for a long time without distractions.
- High power - easily drives fasteners into wood of any density.
- A wide selection of consumables in length and cross section.
- The air motor is designed for high loads.
- Supports driving in brackets with a queue.
- Many spare parts for self-repair are on sale.
- Cons Sumake N-50
- There is no fuse - maximum care is required so as not to accidentally pull the trigger when moving or transferring the tool.
- We need a powerful compressor for trouble-free operation - in one stroke the stapler consumes up to 2.7 liters of compressed air.
- The weight of the stapler 2.65 kg tires the hand - it requires breaks in work.
- The rapid-fire function is unusual and requires skill.
- If you choose the wrong hose section from the compressor to the gun, you can significantly reduce its power.
Output. The stapler is suitable for furniture production. The quick-lock function significantly speeds up the process. The possibility of using long and wide staples allows you to fasten thin materials that need a large clamping area so that they do not tear.
FUBAG S1216
One of the most affordable pneumatic staplers, consuming up to 20 liters of air per minute. Equipped with a long retractable magazine containing 100 staples.
+ Pros of FUBAG S1216
- Quick connection to compressor hose thanks to Rapid connection.
- Soft comfortable grip.
- Able to shoot up to 20,000 staples without jamming and idle.
- Optimum trigger tightness.
- The lightweight body allows you to work for a long time with outstretched arms or to attach material over your head.
- Clogs staples 14 mm into plywood at not full power.
- Cons FUBAG S1216
- A small case in which almost nothing extra fits.
- It breaks quickly with everyday use - enough for 6 months.
- Weak magazine mount plate.
- The striker wears out unevenly, which affects the correctness of clogging.
- With haste and quick work, the tongue wedges.
- There is no blocker against accidental operation.
Output. This is a simple pneumatic stapler for domestic use, which is useful in a private workshop. With it, you can easily equip a greenhouse, equip a wind protection, attach a hydraulic barrier, beat the wall with an isolon. The price of the model is one of the cheapest.
Best Network Stapler
Network staplers are equipped with an electric motor that transmits torque to the percussion mechanism. Thanks to their constant supply, they can work for a long time, but you always need to pull the extension cord along with you. It is often possible to charge staples or nails into a holder, which makes them more versatile (but you need to change the feed system). This type of tool is practical for a stationary place of use in the workshop or for long-term repair at the facility.
Bosch PTK 14 EDT
A stapler from a German manufacturer with adjustable impact force by turning the wheel and selecting the number of driven brackets at a time.
+ Pros of Bosch PTK 14 EDT
- The wide trigger, designed for several fingers, is convenient for long work.
- Intuitive designation on the case for the choice of impact force.
- The stapler works with both brackets and nails.
- Makes up to 30 beats per minute.
- The kit comes with the 1000th staples 10 mm long.
- An indicator of the number of staples.
- Able to easily break through chipboard not only from the end, but also from the plane.
- One of the few models that knows how to beat with a doublet.
- Cons Bosch PTK 14 EDT
- It weighs 1.1 kg, which tires hands with long use.
- Bites even “native” staples.
- If it is bad to aim or work with trembling hands, then he does not finish 1 mm and you have to do it manually.
- A coarse cord complicates the manipulation.
- The German model is assembled in China.
Output. This stapler is a good replacement for manual models, if the mobility of the tool does not matter to you.
The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.
