Reliability Punch Rating - Comparison of the best models for home and professional use

To select a good power tool, it is not enough just to study its technical characteristics, because even a powerful and multifunctional device in operation can show itself far from the best side. This rating of drills for reliability, built on the basis of first-hand reviews - those who have been using these devices for many days and even know about minor flaws, or lack thereof.

The best home punchers

Since home punchers are purchased for periodic and often short works, the requirements for them are relevant:

• the device should be compact enough not to take up much space during storage;
• power sufficient for at least short work on strong concrete;
• reliability (the ability to periodic work in the "wear" mode) - you can not use the punch for several months, and then start a full-fledged repair;
• the presence of additional functions - mode switch, reverse, speed control - all of them are useful in any case.

All devices that fall into the rating of punchers for home, without fail comply with the listed requirements.

Bosch GBH 2-26 DFR

The device, which the manufacturer himself positions as a model of the "Professional" class, which shows his ability for long-term continuous operation. Its 800-watt electric motor produces 900 rpm, with the possibility of electronic adjustment of their frequency, there is also a reverse function. In the mode of a puncher, 4,000 strokes are made on the working surface within a minute, but the device can also be used as a drill or a screwdriver - an adapter for conventional drills is included. Drills with a diameter up to 26 mm are used.

Such a device will be a reliable assistant for frequent minor work. Suitable for domestic and professional use. The main thing is not to try to use it in cases where you need a very powerful hammer drill. He will probably cope with such work, but this will greatly affect the overall service life of the device.

Makita HR2470

Universal three-mode rock drill for work on concrete bricks and similar materials. Ergonomic handle design maximally absorbs vibration. Equally, the device is convenient for use by left-handed and right-handed people. Motor power 780 watts.The rotation speed of 1100 revolutions per minute - there is speed adjustment and reverse. In the chiselling mode, 4,500 strokes are made on the working surface.

The puncher is intended primarily for light work - it is in these conditions that it demonstrates all its positive aspects.

AEG KH 24 XE

720 Watt multi-function medium-power rotary hammer with SDS-Plus chuck for drills up to 24 mm in diameter. The rotation speed of the electric motor is 1500 revolutions per minute with the possibility of adjustment and reverse stroke. The number of strokes on the working surface is 4500 / min.

If you do not load the puncher with heavy and extremely complex work, then buying this device is one of the best solutions in terms of price and quality for home use.

Top Professional Hammers

These devices are intended for those who make money on repairs and who will load the punch with daily continuous work - drilling holes in thick concrete, punching openings in walls, drilling crowns, ditching grooves for electrical wiring, etc. The main criteria by which a professional punch is chosen : price, quality, rating - even the functionality is far from the first place. The main thing is the fulfillment of its direct “duty”, but in any conditions.

Makita HR5001C

A powerful hammer drill with an electric motor of 1500 watts allows you to use drills with a diameter of 50 mm and crowns up to 160 mm, giving out impact force up to 17.5 J. In the work, you can use 2 modes - chiselling and drilling with impact. An electronic speed control system and a mechanical speed switch are used, plus a soft start system. In terms of ergonomics, it is somewhat distinguished from competitors by the D-shaped handle, which is not a pin, but a closed handle.

User reviews characterize this hammer drill as a professional and reliable tool. It must be remembered that the cost of devices of this class justifies the purchase only on condition of constant use - otherwise it is better to consider where it can be rented.

Bosch GBH 8-45 DV

Hammer with a double-acting anti-vibration mechanism - the vibration is damped in a spring-loaded handle and a counterweight in the device. The engine power of 1500 watts allows you to work with drills with a diameter of up to 80 mm and drill holes with crowns of 125 mm, giving an impact force of up to 12.5 J. The rotary hammer has a protection against jamming of the drill that prevents turning the tool in your hands.

A professional tool designed for comfortable and long work. The reliability of the device allows you to recoup the punch, not only with direct work, but also renting it out.

DeWALT D25602K

A dual-mode rotary hammer with an engine of 1250 watts, for working with various building materials. Allows the use of drills and crowns with a diameter of 65 and 100 mm, respectively. The vibration protection mechanism and the relatively light weight of the device allow it to be used longer without interruptions for a “change of hands”, and a safety clutch with adjustable sensitivity makes work safer.

When choosing, it should be borne in mind that, compared with competitors, there is a certain lack of power and impact force for working with very durable materials, but there is a tangible gain in convenience due to weight when working with low and medium strength concrete.

The best cordless rotary hammers

The requirements for such devices are not very different from those presented to network analogues, although the price difference is quite noticeable. The best puncher of this class is selected for such indicators as battery life, charging speed and the presence of an additional battery in the configuration, and highlighting the working area. The last function must be paid special attention, because battery devices are primarily used in places without an electrical network.

Makita DHR242RFE

A three-mode perforator that allows you to drill wood or metal and drill holes in concrete with a diameter of up to 24 mm, giving a shock force of 2.4 J at a frequency of up to 4700 beats / min. The durability and unpretentiousness of the device is ensured by the use of a brushless motor in the design with the ability to adjust the speed from 0 to 950 rpm.

According to user reviews, there is no noticeable difference between this device and network analogues. The puncher is suitable for professional installers of low-current circuits and similar works, when the mobility of the device becomes a decisive factor.

AEG BBH 18 Li-402C

Electric motor with 1400 rpm, three operating modes, impact force 2.3 J with a frequency of up to 4200 per minute, drilling holes in concrete with a diameter of up to 24 mm, work with wood and metal with drills up to 30 and 13 mm with a cartridge rotation speed of up to 1400 rpm - these characteristics are no different from network punchers of this class. Like a cordless rotary hammer, AEG is equipped with two batteries, the charging time of which is about 30 minutes, which allows you to work without interruption in their recharging.

Other things being equal, this rotary hammer can be selected if necessary in an extended battery life, which is provided by high-capacity batteries.

The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.