Paint corundum

I used insulation Corundum facade, in principle, everything suits me, there are many advantages in the material, so I advise!

- excellent adhesion, it is possible to paint any surfaces without any problems: plastic, wood, metal, brick, etc.
- painted a small area between the slope and the wooden window frame, the layer turned out to be about 1 mm. The result for the better became, noticeable immediately, on the painted part there is really no cold, so now I will know how to remove the cold bridges;
- the material is not combustible, specially experimented about this. He took the can and painted it, after it was completely dry, decided to try to set fire to the lighter, as a result, the bank was only able to smoke;
- the paint practically does not smell and, accordingly, it is pleasant to work with it, it will not cause cough and nausea.

- price and everything for me.

He moved to his own house and began to notice that in winter, when there are severe frosts, the slopes begin to freeze around the entire perimeter (probably the whole thing is that the window openings are concrete). I decided to fix this problem and insulate the slopes with special heat-insulating paint.

In the store, I was advised to purchase the Corundum heat paint, as a person who did not really understand everything, I decided to trust the seller. And now I can say with full confidence that I made the right choice. The paint works and no more words are needed, I really see and feel it. I have a coating with a thickness of about 1 mm, having touched the coating with my hand, I feel warm, and if I touch the part where the facade is not finished, I have to pull my hand almost immediately, because it starts to freeze. In my opinion, this is the most reliable evidence that the paint works.

paint works

price

In Corundum heat-insulating paint I was attracted by the ease of use. I painted all the metal parts of the house with an ordinary brush and roller. I didn’t have to buy any additional devices, you can do without unnecessary waste.

It was not difficult to paint, but this process requires accuracy: you cannot apply paint with a thick layer and the surface to be painted should be without blemishes. An average of 1 mm thermal insulation layer must be applied in at least 2 runs. Each layer should stand for about a day for proper polymerization, so the application process takes time.

As for the price, I can immediately say that it’s expensive, one liter of paint cost me an average of 500 rubles. But if you can afford it, don’t hesitate, the insulation of Corundum works perfectly, I have at least no complaints about it.

effect, result

applying is not so easy

I have been working with corundum thermal insulation for several years, it suits me completely in terms of its performance. In fact, Corundum paint is a heat insulator in which the internal structure consists of many microspheres with a low level of heat conductivity. That is why liquid thermal insulation corundum, in the process of solidification forms a film with unprecedented properties.
It is also necessary to take into account at the time of purchase what material this insulator is specialized for. If it is intended for facades, then you should not try to paint it on metal, it definitely will not lead to "good".

It is also important when working with Corundum paint to perform all the actions according to the instructions, and then this ultra-thin insulation will delight you with yourself for many years.
I definitely recommend it, the main thing is to find an approach to this material and there will be no problems.

work result

you need to work strictly according to the rules

Most consumers are inclined to the idea that liquid thermal insulation coatings are not high enough and effective enough. But, I would like to stand up for them, and more specifically, we will now talk about the colors of Corundum. This material proved to be good on the job, and I have no complaints about the paint.

I applied liquid heat-insulating ceramic material with a regular brush, about 2.5 mm thick. At the moment, a little more than 1.5 years have passed, and I can say that the material does not fail me:

- the thermal insulation surface looks homogeneous, during this period no cracks appeared on it;
- adhesion is fully consistent with the promises of the manufacturer;
- the coolant temperature is 131 degrees, and after coating, the surface temperature has become 45 degrees.

This liquid heat-insulating material, fully justifies its value.

quality and effect

price, hard to find on sale