Hammers Bort (Bort)

By last year’s repair, I finally decided to throw away the old drill, which was already so worn out that it was scary to look at it in places. I bought a Bort BHD-800 rotary hammer in the store, which was neatly packed in a plastic case. Inside the chest is a perforator and many other additions to it. There are, drills, depth gauge, cartridge, brushes. There is simply an excellent reverse function, during operation it greatly simplifies the use of a rotary hammer. 3 operating modes: blow, drill and of course drill with a blow. In general, he has excellent equipment, a good hammer drill at an affordable price. The details are absolutely all German, but their connection takes place in China, which worries me a little, although there is no point in complaining about it.

Many functions, and the price is good.

A short power cord, we constantly use an extension cord, it is not enough.

Faced a problem, it was necessary not an expensive hammer drill and that he also worked well. In the store, I purchased a Bort BHD-700 rotary hammer, gave about 2700 rubles for it. I checked it when laying the strobes in a brick wall under the wiring. After 20 minutes of operation, the punch did not heat up much, the power of the output blow is pretty decent (2.8-3 joules will be accurate). Once during work, I had a bit of a “bite” of the drill, there was a very good function of a return stroke, now I don’t have to disconnect the jammed drill and loosen it from the wall manually. I turned it a little back and the drill is "free", you can work on. I have been using it for many years, the only problems were with the start button, but it turned out that it just needed to be cleaned. In general, I follow and maintain it regularly, I don’t know how it happened. I am very pleased with the purchase, such a punch will always help!

strong blow, reverse function.

not very comfortable handle.

They started a grandiose repair with their father in their apartment, and so that they wouldn’t run around the neighbors decided to buy their own hammer drill. Neither dad nor I have special knowledge in this area. The store reviewed a lot of models, and guided by dad's confidence in German quality and the seller's advice, we bought a Bort BHD-1500-K puncher.

In appearance, the unit looks very decent, good equipment, a nice suitcase and the price, in principle, is very reasonable. But in reality, the Bort BHD-1500-K did not live up to our expectations. After literally two days of operation, we noticed a beating of the cartridge, although it was not given special loads.With each new application, the heartbeat intensified. The second unpleasant moment is that the shock function stated in the instructions does not correspond to reality, it is noticeably less.

As a result, the punch is under warranty repair, and we work as a neighbor.

price, equipment, appearance

shock function less than promised, build quality