The effectiveness of storage water heaters is confirmed by their sales and production volumes. This is one of the best solutions to provide the house with hot water and not depend on the city boiler. At the same time, it is very difficult to decide which company a storage water heater is better, because each of them seeks to beat competitors and produces equipment using its own technical know-how, which improves its characteristics.

To simplify the selection process, we made a review of the most popular manufacturers of domestic-type water heaters (for a private house) and the highest level (increased capacity and volume).

Storage electric heaters - the best companies

The best manufacturers of storage water heaters for the home

The production of domestic water heaters in terms of the scale and complexity of the tasks given is in no way inferior to the manufacture of professional devices. It’s just here that manufacturers of storage water heaters make equipment that is supposed to be used in confined spaces to ensure an uninterrupted supply of hot water for home needs.

AEG - experience and practicality

AEG is one of the few old-timers in the water heater market. It was registered since 1887 and in the process of development mastered the manufacture of a wide variety of equipment. Now it is the largest manufacturer with manufacturing enterprises around the world, and a separate unit, AEG Haustechnik, is responsible for the production of domestic water heaters.

aeg logo

To ensure that customers better navigate the water heaters manufactured by the company, all models are divided into separate series with their own distinctive properties:

EWH Basis.

Ewh basis

Standard devices with a 30-200 L tank and stainless steel heating elements. For wall mounting in upright position.

EWH Mini.

EWH Mini

The same standard, but of a reduced volume - a tank of 10-15 liters is used.

EWH Comfort EL.

EWH Comfort EL

A distinctive feature is the use of a “dry” heating element, three operating modes - from energy-saving to accelerated heating and a complete set with touch LED displays. The capacity of the tank is 30-150 liters.

EWH Universal EL.

EWH Universal EL

The same as the previous series, plus additional enameling of the heating element and the possibility of horizontal arrangement.

Dem basis.

Dem basis

A series of increased power with the ability to connect heating elements for 2, 4 or 6 kW from a network of 230 and 400 volts. Working tank 30-150 l, the ability to set the water temperature from 12 to 80 ° C.

Dem c

Dem c

Differences from the Basic series are copper heating elements and a temperature adjustment range from 35 to 82 ° C.

 

STM.

STM

High-volume floor-mounted water heaters - from 200 to 400 liters.

The STM, EWH Mini and DEM C series of water heaters are produced in Germany, and all the rest are produced in Slovakia.

Shop offers:

 

Electrolux - versatility and diversity

The many years of experience of Electrolux's development engineers is reflected in the quality and diversity of the functionality of the produced water heaters. One of the main dangers - overheating of water, is eliminated by the presence of safety valves, which relieves excess pressure when it occurs. The fight against another “scourge” of heating devices - the occurrence of scale and corrosion of the tank is carried out using copper heating elements with nickel coating and medical steel.

electrolux

Electrolux domestic water heaters are divided into the following series:

EWH Quantum.

EWH Quantum

Standard models with a working volume of 50-100 liters. 1.5 kW heaters are used, the warranty on equipment is 5 years.

EWH Quantum Slim.

EWH Quantum Slim

From the basic models, the series differs in a flat tank of a reduced size - with a volume of 30 to 80 liters.

SL and R.

SL

Water heater models with the choice of operating modes - “economy” and “full power” - two “dry” heating elements can be switched on separately from each other.The working tank is 30-150, and the R model has 200 liters, with a power of 1.6-2.4 kW.

EWH Centurio V / H.

EWH Comfort EL

Water heaters with the possibility of horizontal and vertical installation. A flat tank allows installation in small niches, and copper heating elements with a nickel coating increase the life of the devices with a 7-year warranty. Information about the current operating mode is displayed on the LED display.

A variety of technical and design solutions will allow you to find a decent model even for the most demanding customer.

Shop offers:

 

Ariston - comfort safety

Water heating equipment is not just one of the priorities of the company. Since the brand's inception in 1930, it has been working exclusively in this niche and rightfully bears the title of professional and one of the trendsetters in the field of autonomous heat supply.

ariston

Depending on the technologies used, the materials used and just the sizes, the produced models are divided into the following series:

ABS Shuttle.

ABS Shuttle

A flat working tank of 30-100 liters, two heating elements with a total capacity of 2.5 kW.

Small

small

Compact models of 10-30 liters for installation above / under the washbasin, 1.5 kW heating elements.

ABS Pro R.

Pro r

Tank with an antibacterial coating with a volume of 50-100 liters, heating elements with a capacity of 1.5-1.8 kW. Slim series with a reduced flat tank.

ABS Pro Eco.

Pro eco

It differs from previous series by the presence of an electronic thermostat.

ABS Velis Power / Inox Power.

ABS Velis Power

Basic models: double heater with the possibility of separate inclusion, electronic control, a tank with a capacity of 30-100 liters. The Velis range uses stainless steel, while the Inox adds a silver plated finish.

ABS Velis Plus / Inox Plus Power.

ABS Velis Plus

“Reprint” of previous series on updated production lines.

Platinum Eco / Platinum Eco Slim.

Platinum eco

Tank with antibacterial protection (slim - reduced size)

Ti-Tronic Industrial.

Ti Tronic Industrial

Heater for semi-industrial volumes. Titanium-coated tank with a capacity of 200 to 500 liters. Power TENOV from 2.6 to 6 kW, the ability to connect to a three-phase network.

The long service life of the heating tanks is ensured by the use of Micro Plazma Tig welding technology, which eliminates the appearance of air bubbles in the weld and the development of corrosion.

Shop offers:

 

Timberk - The Grace of Technology

All Timberk-manufactured water heaters are designed to withstand heavy use. For this, not only reliable materials and components (stainless steel for the tank and magnesium anodes) are used, but also innovative technologies, according to which the company is one of the leaders in its field.

The "chip" of Timberk water heaters is a microprocessor control system that monitors the occurrence of leaks and prevents the occurrence of excessive pressure in the tank. You can learn about the features of the models from the marking: the shape of the case is F (flat) and R (round), the material is S (stainless steel) and E (enamel).

timderk

The main series of produced water heaters:

SWH RS7.

SWH RS7

Series with thin body (d = 29 cm). The working volume of 30, 40 and 50 liters, the installation is only vertical.

FS1 / FS2 / FS3 / FS5 / FS6.

fs1

Flat-shaped tank for 30, 50, 80 and 100 l, heating elements for 2.5 kW, installation in vertical and horizontal position.

The protection system of Timberk water heaters can be called 3D Logic or 3L SPS, but there is no fundamental difference between them - the buyer in any case receives the maximum reliability of the equipment purchased.

Shop offers:

 

Thermex - simplicity and reliability

Since the mid-20th century, the design bureau and the scientific laboratory of the company have been exclusively engaged in the development and methods of improving water heaters. The result of the work is impressive - the company supplies its products to 160 countries, invariably occupying one of the leading positions in the market.

The engineers of the company solve one of the “Achilles heels” of water heaters - corrosion of tanks in places of welding steel sheets - by an innovative method of their own development. This is the technology codenamed G5 - laser welding of metals in a vacuum to avoid air or other impurities entering the joint.Tanks coated with bio-glass porcelain are also used, in addition to the appearance of corrosion, which prevents the appearance of microorganisms.

thermex

Models are combined in the following series:

Round.

Round

Classic cylindrical water heaters. Tank sizes from 5 to 150 liters, with wall and floor installation.

Ultra Slim

Ultra slim

Ultra-thin water heaters (d = 270 mm) vertical mounting with a capacity of 30 to 50 liters.

Flat Plus.

Flat plus

Flat-shaped water heaters with a capacity of 30-100 l, with microprocessor control and display of operating modes on the LCD display. The material of the heating tanks is stainless steel.

Flat Diamond Touch.

Flat diamond touch

The entire interior is taken from Flat Plus models, but the exterior is polished stainless steel.

Champion (+ Slim).

Champion

A separate line of heaters in which the inner walls of the heating tanks are coated with bio-glass-porcelain. The Champion line is made in a steel case with a working capacity of 50-300 liters, Slim are made in a plastic case - they are designed for 10-30 liters.

Sprint

Sprint

In terms of characteristics and dimensions, this is the same Champion, but the outer case is rectangular in shape, and the Turbo Boiler function is added to the electronic filling, which can significantly accelerate the process of heating the water.

To save energy, many models use two independent heating elements - if now you do not need the fastest heating, then only one of them works. Management of water heaters is maximally simplified - wherever possible, developers adhere to the principle of "nothing more."

Shop offers:

 

Manufacturers of storage water heaters for large facilities

Autonomy in the supply of hot water and heating is needed not only for private houses and apartments. The owners of large and extra-large facilities, such as, for example, hotels, stadiums, airports and other stores, also think about this. To provide them with hot water, we need devices that are significantly larger than household ones in power and size, which in turn requires the use of non-standard solutions.

OSO Heaters - When Size Matters

oso

The Norwegian company OSO is one of the largest manufacturers of professional thermal equipment - it will be one of the first to advise if it is necessary to choose a storage water heater for large objects. In addition to simply high quality, OSO brand equipment has advantages that not all competitors can repeat:

The volume of the heating tank is up to 10,000 liters. The difficulty here is not even to create a tank of such dimensions - with dimensions of the order of 2x2x2.5 meters, it is necessary to ensure at least uniform heating of the water, plus the maximum possible energy savings (and this is far from all the tasks that need to be solved).

Production of stainless steel heating tanks without the use of anti-corrosion coatings. This is achieved through the use of proprietary plasma arc welding technology, which eliminates the need for fluxes or similar additives, which over time can trigger corrosion.

The longest guaranteed lifetime. The cost of equipment of this size is quite high, so the longer the warranty period, the calmer the buyer. Through the use of proprietary technologies, OSO provides a 10 year warranty on its heaters.

A separate advantage of the brand is experience - for more than three decades, the main tasks of the company's engineers were the development and installation of super-large heating devices. OSO water heaters are already installed in residential and office buildings, cargo and passenger ships, sea oil rigs and other facilities. With such a number of developments, a sufficient number of solutions has already been accumulated, which will significantly accelerate the development and implementation of new ones, if necessary.

Shop offers:

 

Stiebel Eltron Water Heaters - Experience and Innovation

Stiebel eltron

The first electric boiler, which at that time had no analogues in heating speed, the founder of the company developed and put into production back in 1924.This gave rise to the development of the company as one of the leaders in the production of heating appliances, first of a household class, and since 1968, Stiebel Eltron has become one of the largest authorities in the production of professional heating equipment. At that time, the company had more than a decade of experience in the production of non-standard equipment, including boilers and coffee machines for passenger aircraft.

The company is present in the markets of about two dozen European countries, employing about 3,000 people in the production and maintenance of its products. One of the large-scale projects, whose customers were domestic companies, is the reconstruction of water heating systems of the Luzhniki stadium in the capital and the Emelyanovo airport in Krasnodar.

From the very beginning of its development, the company sought to more accurately guess the needs of customers, for which demand is constantly monitored among existing and potential customers. Also, Stiebel Eltron carefully monitors the quality of products at all stages of production, so they provide a guarantee from 3 to 10 years on their equipment.

Shop offers:

 

The selection of manufacturers was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.

Which company did you decide to buy a storage water heater?


Copyright © 2024 - techno.techinfus.com/en/ | chinawebteam2014@gmail.com

Technics

Tools

Furniture