Screwdrivers Interskol

The old man DA-12ER-02 in 2005 was acquired and began his career with fasteners for blinds, then he assembled window fittings, then drywall, mastered ventilation and roofing, furniture assembly, etc.

First disease (200 - from a hard overload (drilling reinforcement), the engine burned / replaced.
-Second disease (2009) - the rattle refused / not fatally, but not conveniently.
Third disease (2010) - the case fell apart
-Chronic sore (from 200 - the speed switch is naughty, shortcomings are more frequent.

At present, the “senior citizen”, despite the long-standing replacement, has an extremely working mood. Batteries, of course, are already planted, but are quite functional.
Result: 2005-2017 in the same hands.

Price
Reliability
Build quality
Very comfortable grip

- Not balanced, the center of gravity is strongly biased forward.
- Lack of fastening on a belt or a wrist strap, at a height it was not enough, I had to lace "collective farm".
-
- There is no flashlight, although this is already an obvious nit-picking after any makit, metabe and other foreigners.

My grandfather considered an ax to be the main tool in his house, and his father a hammer. But over time, values ​​change, and for me the main thing is a cordless drill / driver.

When choosing, I wanted to combine the most powerful, most reliable, cheapest unit on the market. The most powerful and inexpensive combined on the DA-13 / 18M3 from Interskol.
So far, nothing has worked, but 2 months in the village is already a good application for the title of the most reliable.

Good batteries - they charge quickly, only an hour, enough for a long time, in the cold, as it seems to me, they don’t even lose anything. True, the batteries are nickel-cadmium, so you have to make sure that they are charged and discharged to the end.

If it stops drilling or twisting, then I twist the rest of the tank at idle. About ten times a minute, until it stops turning completely - the battery runs down almost to the end, you can put it on charge.

In two months, they gained a little.
They hung a net under the roof in the hayloft - they dried the grass's wife - they twisted them under a hundred screws.
Hole made more than six hundred. In the wall of the workshop he made holes for chopiki - 15 rows of forty pieces - exactly six hundred. 10 mm holes, they are inserted into them, where there are simply choppers, where are the traffic jams with hooks, where is the shelf, the tool is suspended on them - evenly and beautifully. Well, about twenty to thirty holes still typed.

It is also pleasing that this is not German, not Japanese, not Chinese, ours is a Russian manufacturer. A very convenient tool, although it is heavy. And much more important today than a hammer and an ax.

Price, power, two speeds, keyless chuck, spindle lock, quick charger (1 hour), quality assembly

No for me

Two batteries without the notorious memory effect allow you to twist the screws for a long time. Pulse charging really fills them in an hour, even when fully discharged. Despite its light weight and small dimensions, the torque is quite decent, moreover, it does not fall as the battery discharges. At a lower stage, 6 mm screws go into a tree only this way.

Without a cartridge, the length of the tool is so small that you can stick into any kind of narrowness where you cannot reach with an ordinary shurik. In such secluded places and backlighting is very handy so as not to flounder with the carrying. When assembling corner cabinets and compartments, I fully appreciated this, the brightness of the LED is enough.
For carrying and storage it is completed with a small convenient suitcase, in which interchangeable bits also fit. The screwdriver is well balanced, nice to hold in your hands.

Now I'm looking at the entire M3 series, maybe I’ll take something more powerful over time.

price, size, weight, durable case, fast charge, long runs on a single charge

drills are suitable only with a hex shank

I could not resist buying this screwdriver.
The mere fact that its weight with the battery is only 1 kg - already says a lot. I read about this Russian development, and as soon as it appeared with us, I bought it and immediately into the business.

The pistol shape, small, fits comfortably in the hand, the handles are rubberized almost completely.
There are two gear speeds. 1 - 400 rpm, 2 - 1500 rpm. This is a very decent indicator for such a baby.

The keyless chuck, one-foot, snap fastens tightly, change of a drill or bits second matter.

First impressions are more than decent. The most powerful torque. Adjustment by the coupling on 18 provisions. Smooth running, spindle, if necessary, can be blocked automatically. Drilling in wood and metal according to the declared parameters clearly corresponds, specially charged the drill for 10 for metal and 20 for wood. Twisting the fasteners is generally a song! The 6 mm screw comes with a slightly noticeable effort. By the way, for female hands this machine will be just right, the wife appreciated.

The lithium-ion batteries are inserted flush into the handle, do not bulge and do not interfere, which added mobility to the screwdriver.
Hourly charger, included a replaceable battery.
Case made solid, with metal locks.

Convenience, weight, speed, torque

Sometimes it takes effort

I do not advise buying an Interskol DA-12ER-01 screwdriver even for home use, the quality is poor and the model is completely thought out. The cost is low, but what good is it, if the equipment does not work well, the quality of work does not satisfy.

- cheap;
- Included were 2 batteries.

- the batteries are weak, they do not charge very long, in order to assemble a cabinet or cabinet I have to recharge them several times;
- a year after the purchase, the drill stopped fixing at the punch, it just started to scroll;
- a weak apparatus, it does not pull serious work, only for rare homework;
- the case has flimsy latches; after 1.5 months, they fell apart;
- in the case there are not thought-out holes for drills and bits, it is simply unrealistic to push them in there;
- heavy, his hands get tired during work.

I bought a screwdriver of the Interskol DA-12ER-02 brand, for a long time, I have been operating it successfully for more than 6 years. Of course I can’t boast that I use it every day, I didn’t buy it solely for the purpose of domestic purposes.

The screwdriver helped me repair and build during that time: a garage, a bathhouse, a greenhouse, a fence, at home I did a lot and a bunch of other homework.
Initially, he was not careful with him, since, frankly, he thought that he would last 2 years from me (he bought at a low cost), but now I can say that this screwdriver has fully worked out its price and it will serve the owner for a long time, and reliably.

The assembly is good, strong, the screwdriver has repeatedly fallen and nothing fell off of it. The batteries are still alive, they last for a long time, and they charge very quickly. It does not work well as a drill, but a screwdriver is essentially not for such a job.

The indestructible thing.

No bit holder.

About 5 years ago, on a happy occasion, I acquired my assistant - a screwdriver from the company Interskop DA-18 ER. This is a universal device, for all the time of intensive use only batteries were replaced in it. A convenient case with good fasteners is attached to it. An 18-volt battery is designed for this screwdriver, it charges for about an hour.

The screwdriver operates at 2 speeds, the first is slow, and the second is designed for intensive drilling. Very comfortable handle, the tool does not slip out of the hands, thanks to the rubberized pads that are located on it. There is also a bit holder on the screwdriver, it is located on the handle. The maximum diameter of the screws with which you can work on this machine is 6 mm. Personally, I am completely satisfied with the screwdriver, he fully justified himself during this time, and showed himself as a faithful assistant.

Affordable, versatile, reliable

Weak batteries

I am engaged in finishing work and have long been thinking about acquiring a good, to be more precise - universal screwdriver. On the advice of the foreman, he acquired this particular screwdriver. After acquiring it, they immediately decided to try the “new thing” in practice, for the entire time of the work done, this screwdriver just did not do anything, drilled a brick, twisted a huge number of self-tapping screws and screws.

All these "tests", the screwdriver was successful. I really liked the thoughtfulness of the kit going in place with a screwdriver, the “charger” has a rather long cord, which is very handy when the outlet is at a height. I am very pleased with the screwdriver.

low price.

not

I have been using this unit for 6 years, so a lot of stories have accumulated about it.But, despite the long "grinding", I still consider the Interskol DA-14.4 ER-F screwdriver to be the best acquisition. Cheap, and takes any material. I even drilled a brick once. I successfully repair, build, assemble, assemble with it. I like that the shurik holds a charge qualitatively.

A normal device, if only charged when fully discharged, do not torment for hours in the cold. But it’s rather heavy and weak in body. It is necessary to keep it level, which takes a lot of effort. The speed switch is kind of loose, because the teeth on the gearbox are flying, I’m not touching anything.

The unit is super powerful, but quickly overheats. Result: low productivity. Once the charger melted, I bought a new one and ... burned again, incorrectly inserting the battery.

durable, inexpensive, universal, strong, slowly discharges

it needs careful operation, it is massive and weighs a lot, it has a vulnerable body, an unreliable speed switch and a “sensitive” charger, it is modest in performance