Semiautomatic machines are very productive due to the continuous wire feed and the absence of slag after welding, which reduces the subsequent processing of the seam. But how to choose the optimal model so that it sufficiently melts thick metal and does not burn thin? This article presents the best inverter-type welding semiautomatic devices, all of which were selected based on user feedback and key equipment characteristics.
The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.
Semi-automatic welding inverter with a wire thickness of 0.6-0.8 mm and a metal thickness of 0.5-2.5 mm
Semiautomatic devices, which are designed for a small thickness of metal, belong to the category of household. The current strength is regulated from 20 to 200 A, but the actual data may not correspond to the passport, so you should not count on the maximum performance. Such devices differ in small dimensions 200x300x500 mm, which is convenient for transportation. The low weight of 10-13 kg allows them to be used at a height, provided that a long gas hose comes from the cylinder.
When choosing a semiautomatic device for thin metal, it is important to pay attention to the possibility of lowering the current strength, which will allow to cook sheet steel and even tin without burning. It is better that this indicator starts from 10 A. Semiautomatic devices with a wire of 0.6-0.8 mm work with standard and reduced coils, therefore, in addition to the household sphere, they have found application in service stations and body repairs.
Thanks to inverter technology, current consumption from the network is reduced and less load is created, which allows them to be used freely in the garage and home workshop. Some units have the ability to cook MMA, not just MIG / MAG.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Svarog REAL MIG 160 | Resanta SAIPA-135 | Wert MIG 200 | |||||||
| Welding current (MIG / MAG), A | 30 - 160 | 10 - 110 | 30 - 200 | ||||||
| Input voltage, V | 160 - 270 | 140 - 270 | 143 - 253 | ||||||
| Open circuit voltage, V | 60 | 65 | 55 | ||||||
| Operating voltage, V | 15,50 - 25,60 | 15,50 - 19,50 | |||||||
| power, kWt | 6 | 6,6 | 4,40 | ||||||
| Turn-on duration at maximum current,% | 60 | 70 | 60 | ||||||
Svarog REAL MIG 160
A universal inverter-type welding semiautomatic device with a current range of 30-160 A in MIG mode. In it, you can connect a conventional holder with electrodes and cook at a current of 10-140 A. Thanks to an open-circuit voltage of 60 V, the arc always ignites easily, even on rusty metal. The wire speed is adjustable from 1.5 to 14 m per minute.
+ Pros Svarog REAL MIG 160
- The robust case with rubberized corners and legs reliably protects internal elements and is stable on planes at an angle (for example, on the roof).
- Durable wire feed mechanism made entirely of metal - no slipping.
- Convenient wide carry handle.
- Adequate instructions, but without it, everything quickly becomes clear by the notation on the front panel.
- Cope with low carbon steels and aluminum.
- The burner has an euro connector and in the future it will be easy to find a replacement.
- Easy polarity reversal for welding with flux-cored wire, as well as with conventional and gas supply.
- Includes gas hose and clamps for easy connection.
- Cons Svarog REAL MIG 160
- Comes without a shoulder strap.
- There is no display, so at a distance of 2-3 m it is already difficult to see what current is set by the switch on the scale.
- The internal location of the coil does not allow the use of consumables for 2 kg or more (do not fit).
- In MIG mode, the current drops to 30 A, so a very thin metal will burn through.
- With continuous operation, the maximum current strength of the inverter semiautomatic device is 90 A - this will require interruptions for cooling every six minutes out of ten.
Output. Due to the operation from the input voltage with a range of 160-270 V, this semiautomatic device is the best for welding in a private house or cottage, where a weak power line is stretched. A power consumption of 6 kW will not create overloads on internal wiring. Setting the number of volts (except for amperes and wire feed speed) will provide more even deep seams. It is convenient to use it to cook the bottoms of aluminum boats.
Resanta SAIPA-135
The rating of inverter-type welding semiautomatic devices for thin iron was headed by this device, because it has a welding current adjustment range from 20 to 110 A and it is able to operate with a maximum load of up to 70% of the time. Moreover, the weight of the semiautomatic device is 11 kg, which simplifies on-site transportation.
+ Resanta SAIPA-135 Pros
- Hardy and unpretentious to the place of operation - will cook and serve for a long time in a room with dust.
- Simplicity of tinctures, convenient switches, an intuitive dial with symbols.
- Much cheaper than imported counterparts.
- A mechanism with preliminary gas purging is built into the burner.
- It is possible to connect a conventional cable with a holder for welding with a melting coated electrode.
- When connected to the network, the semiautomatic device first tests all the nodes for serviceability, and then gives an indication of readiness for work.
It cooks well in frost - suitable for butt and lap seams.
- Cons Resanta SAIPA-135
- From the housing to the burner a short cable - you often have to rearrange the device.
- It boils poorly with flux wire - you only need a carbon dioxide cylinder.
- Due to the maximum indicator of 110 A, it almost always works at increased load, which reduces its resource.
- A large welding torch makes it difficult to access narrow welding spots.
- There is no display, only mechanical "twists".
- A coil weighing 1 kg is placed inside, so for large volumes for welding, you will often have to open the case and install a new bobbin with wire on the drum.
- The contacts of the buttons on the burner are not high-quality and the inverter unit can feed the wire intermittently - preload of the contact group is required.
- Sensitive to power surges.
Output. Due to the ability to install a wire of 0.6 mm and lower the current to 20 A, they can weld the car bodies without piercing and without interrupting the arc every 5 seconds. This provides even, low seams that are easier to process by stripping for painting. It is best to choose this semiautomatic device for home body repair, but you will only have to work with a carbon dioxide cylinder.
Wert MIG 200
Semi-automatic with two modes of operation MIG / MMA. The range of current strength is 30-200 A. It works on a single phase and produces a constant welding current. PV is 60%. The diameter of the consumable electrode can reach 5 mm. In the settings there is an adjustment of the current strength, inductance and wire feed speed.
+ Pros of Wert MIG 200
- Euro connector for quick disconnection of the burner.
- Indication of power, overload and temperature.
- Weight 10 kg is convenient for transportation.
- When using a 10 m carrier with a cross section of 1.5 mm, the wiring and the socket do not heat up.
- The kit comes with a 1 kg 0.8 mm wire, a guard and a hammer, which allows you to immediately start working.
- The metal wire feeder is strong and durable.
- It cooks with both piece electrodes and wire.
- Possibility of polarity reversal.
- Rugged, well-fitted housing without gaps or play.
- Cons Wert MIG 200
- There are no digital values on the scale, all adjustments are “by eye”.
- The side panel opens up and not to the side, which makes it difficult to remove and install the coil.
- The mass cable is short, and the clip is flimsy - you can only check the serviceability of the device or brew something small (in the future, be sure to replace it with stronger ones).
- The mask, hammer and brush are similar to toys and are suitable only for single use.
- The function of adjusting the inductance is nothing more than a marketing move - it is, but it does not affect the quality of the seam.
- Missing display.
- In bright sunshine, the indication is poorly visible.
Output. Such a compact inverter semiautomatic device with case dimensions of 450x240x360 mm and a weight of 10 kg is convenient for repair in the field. He will easily cook 2-3 mm thick steel with cored wire without a cylinder. Consumption of 4.4 kW permits operation from a small generator. The input voltage is enough 143-253 V, so that the device fully cooked.
Semi-automatic welding inverter with a wire thickness of 0.6-1.2 mm - metal thickness of 1.0-8.0 mm
Inverter semiautomatic devices designed for metal thickness up to 8 mm are professional devices. Their current strength varies from 180 to 250 A. But the power from 220 V allows you to use them at home or in a private workshop. Their power is already significantly higher than household semiautomatic devices and ranges from 5 to 10 kW. The duration of switching on at maximum current is in the range of 60-80%, which is convenient for long-term operation.
This rating of the best inverter-type welding semiautomatic devices includes models capable of working with 0.6-1.2 mm thick wire. Changing the thickness of the additive allows you to weld both thin and thick steel, to weld. But for this you will have to change the cable channel, as well as the mouthpiece of the burner.
Most models are able to cook by manual arc welding with coated electrodes, which facilitates access to bottlenecks or cutting.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Aurora Overman 180 | Svarog REAL MIG 200 | Resanta SAIPA-200 | |||||||
| Welding current (MIG / MAG), A | 40 - 175 | 30 - 200 | 30 - 200 | ||||||
| Input voltage, V | 187 - 253 | 160 - 270 | 198 - 242 | ||||||
| Open circuit voltage, V | 42 | 60 | 80 | ||||||
| Operating voltage, V | 16 - 22,50 | 15,50 - 26,40 | - | ||||||
| power, kWt | 4,70 | 7,7 | 5.5 | ||||||
| Turn-on duration at maximum current,% | 60 | 60 | 70 | ||||||
Aurora Overman 180
This is one of the most reliable inverter-type semiautomatic devices designed only for MIG welding. The vertical narrow case is convenient to place in a limited space. The current strength is set from 40 to 175 A, both according to passport data, and in fact.
+ Pros of Aurora Overman 180
- The torch sleeve has a swivel joint, so no loops are created when twisting - the wire is fed unhindered.
- There is a function of a separate wire pulling without gas supply, which saves consumption with frequent diameter changes.
- Separate outlet for heating the gas mixture at 36 V.
- Thick power cable 2.5 mm2.
- High-quality crocodile and a long cable weighing 3 m.
- A 5 kg coil is placed - you can weld for a long time without being distracted by the rearrangement of consumables.
- The semiautomatic device brews aluminum, provided that pure argon is connected.
- Cons Aurora Overman 180
- For transportation to the place of work, a trolley is needed - the mass of the device is 15 kg.
- It is difficult to find rollers with grooves of 0.6 mm on sale.
- The nozzle is cheap metal and is constantly clogged with spray.
- Cooks poorly in rust - stripping to shiny metal is required.
- Top opening of the hatch for changing equipment.
- The 1 kg reel is not fixed - you have to buy a large one even for short jobs.
Output. Semiautomatic device is the best for continuous operation in the open air, outdoor facilities and in the field. Its temperature range is from -20 to + 50 degrees. Even a gas generator will reproduce power 4.7 kW, so work can be done in places not connected to power supply.
Svarog REAL MIG 200
A professional inverter semiautomatic device with the possibility of welding in MIG mode at a current strength of 200 A. For thin iron, the current decreases to 30 A. The power supply range is 160-270 V. The wire is installed from 0.6 to 1.0 mm through the side hatch. There is a second MMA mode with a welding current of 10-160 A.
+ Pros Svarog REAL MIG 200
- Excellent seams in pure argon turn out.
- There is a polarity reversal function for cored wire welding.
- It withstands drawdowns of the network up to 160 V and at the same time it cooks, but the maximum current strength decreases proportionally.
- It can perfectly cook aluminum without even changing the cable channel in the burner to Teflon.
- Robust case with rubber protective pads.
- Opening the hatch to change the coil to the side, and not up, is much more convenient - it does not close the view when installing the wire in the feed mechanism.
- Reliable burner withstanding continuous operation at high currents.
- Gas hose complete with clamps.
- Cons Svarog REAL MIG 200
- The wire feeder makes loud noises during operation (namely the electric motor itself).
- There is no electrode holder in the kit, although this mode is provided for the semiautomatic device.
- Hands get tired quickly if you often have to carry it around the workplace.
- Not enough display for easy setup.
- There is an inductance adjustment to affect the penetration depth, but it does not work well.
Output. Thanks to the power of 7.7 kW and inverter technology, the semiautomatic device is capable of smelting a large thickness of metal at a current strength of 200 A. This model is the best for regular welding of channels, thick pipes for metal structures, racks, supports. It is best used at a construction site or in the manufacture of arbors, large greenhouses.
Resanta SAIPA-200
This is a “clean” semiautomatic device without the possibility of connecting a holder for electrodes. Such an implementation makes all the settings of the apparatus exclusively selected for welding using wire feed in a gas environment. The current strength is adjustable within 30-200 A, allowing melt steel up to 8 mm thick. The diameter of the wire to be installed can be 0.6 / 0.8 / 1.0 mm.
+ Advantages of Resanta SAIPA-200
- The seams are obtained very high quality - all components of the device are designed only for semi-automatic welding.
- There is protection against overheating, which will turn off the unit in time.
- Able to cook with voltage drops up to 198 V.
- A wide range of applications from bodywork to channel welding.
- All elements of the broach wire of metal.
- The scale has digital notation, so the parameters of the tuned mode can be recorded for future similar work on other devices, and not just remember the stop position of the controller.
- No burns on thin metal.
- Cons Resanta SAIPA-200
- When welding a house at maximum current, it can knock out plugs, although it is designed for 220 V.
- Weight 14.35 kg is not so convenient for carrying.
- When using wire with flux, the seam is not neat, but it will work to connect the metal - it is recommended to work only with gas.
- Need good wiring with a cross section of 2.5 mm2 copper core, otherwise it will melt.
- The warranty seal is located in an accessible place and can be frayed during normal operation - then it is difficult to prove in the service center that the device did not open (very careful transportation is required).
- The power cable is hard and short - breaks out the mount. While the device under warranty, it is impossible to disassemble and remake it yourself.
Output. Good air cooling and perforation throughout the case make the semiautomatic device optimal for long-term use in production. The switching on time of 70% at a current of 200 A allows them to work continuously at lower values (160 A). The Euro connector is convenient for replacing the burner and quickly installing the cable channel under a different wire diameter.
