Solid fuel boilers for long burning

Only because of the height of the chimney took. I could not get the chimney more than 3-4 meters and this one only came up. An important point, I think, is not my question.

Approached the height of the chimney

not

This year I buy a solid fuel TKR plant armor. The site found them last year, read, studied. Last year, autumn lived on heaters, for the winter I had to move to an apartment. This year I want to buy a boiler and live in a house in winter.

all OK

all OK

Hello!
About three years ago, he dismantled an old brick boiler and bought a new modern one, with auto fuel supply and did not regret it. Firstly, fuel consumption decreased significantly. Secondly, you can not approach the boiler and do not constantly throw up fuel; everything is done automatically. Thirdly, it is boiler maintenance, it is very convenient to clean and clean the ash!
And many more pluses! The boiler equipment was purchased here https://kotly-tis.by/product/kotyel-tis-hard-pellet-300/

Auto feed, temperature adjustment, easy care, small size.

Are absent

Last year, we bought a pyrolysis solid fuel boiler Geyser PK-15. Compared to a stove or a conventional boiler, the consumption of firewood is minimal. There were no failures and breakdowns during the heating season, which indicates the reliability of this equipment. Reasonable price, I recommend!

The consumption of firewood is minimal.

Not

Last year, they became the owners of a long-burning boiler Dobrokhot 25M. The first thing I would like to note is of course an affordable price. Naturally, there were concerns whether a product could be of high quality and safety at such a low price. Rummaged all over the Internet. Reviews are both good and not very.

What to do? We went to the factory to speak directly with the manufacturer without intermediaries, because they couldn’t tell us anything in stores, and trusting ordinary sellers was a bit scary, I wanted to get all the necessary information firsthand and get at least some kind of guarantee in case of unforeseen situations.

There they told us everything, showed the operation of the boiler, and we decided to buy. The boiler pleases, the house is warm and cozy. Low price does not mean poor quality, in any case not with these boilers. It performs its functions perfectly.

Economical and easy to maintain.

The ash box is small.

In that year, they completed the same house and began to choose a boiler, IMHO winter is near. )))
The choice fell on the boiler from the Polish manufacturer Pereko. And his friends also advised him.
In general, everything is great. The workmanship is at a high level. House 205sq.m. heated even at minus 35 with a bang. Almost no smoke. And a very convenient machine. He drowned with coal, threw it into the tank about once a week and that’s all. In general, we do not regret the choice made.

Excellent workmanship. Convenient automatic fuel supply system. Quality electronics.

It is sometimes necessary to clean.
There were problems with the initial setup of the system, but later could figure it out.

I used a solid fuel boiler Zota 20 kW in a residential building with an area of ​​140 sq.m., a small firebox in length, quick burning of firewood, with its use you become a fireman!

Nice idea.

a small firebox in length, quick burning of firewood, with its use you become a fireman!

I can’t bring gas into the house, and electricity or heating oil is expensive. Therefore, the only option is solid fuel. But there are problems with it too - the boiler on wood and briquette needs to be replenished with fuel in a few hours, otherwise it will go out, and sometimes we are out for several days. Therefore, the Lithuanian Stropuva S7 was installed at home for a long time. In addition, as promised, manufacturers using a special method of burning fuel. I do not regret it.

The boiler can really be loaded for 2-3 days, and it will burn without outside interference. Even more free time has appeared.

Fuel began to go less, perhaps even due to the fact that the house has a constant temperature and there is no need to heat the cooled walls every other day.

Decent build quality, until I encountered problems with it, I did not have to call the craftsmen even for minor repairs.

I can recommend it to everyone.

Short tinning time and good quality.

Price

At home is a Dakon boiler, model DOR-12. We are already experiencing the 4th furnace season with him. I’m only drowning it with coal, I’m buying a perfect one. I tried to save a few times and drowned with ordinary coal and every little thing, it drowns, but not so stably, it hangs several times and starts to go out. Therefore, he spat on this matter and switched to a selective one.

At a temperature of -20 C, 2 downloads per day are enough. It keeps heat well; I usually light it in October and in April I extinguish it. I also do the cleaning every week. This is primarily required for the connecting elbow, which is located between the chimney and the boiler. Sometimes it clogs, so if smoke started to fly or ash flies when the grate is cleaned, then the pipe must be cleaned. It takes no more than 5 minutes of time.Satisfied with the boiler, the quality suits. I will advise you.

comfortable and practical, holds heat well

cleaning required

Thermofor boiler "Professor Butakov Student Hydraulic" is the very first solid fuel boiler I bought. I had no business with them before, but decided to give it a try. Honestly, I expected more. The manufacturer promised that the boiler capacity of 16 kW should be enough for rooms up to 400 m3, my house is 115 sq. M, the volume is about 300 m3. According to the idea, even a decent margin is obtained here, but there is not enough power. Although the house is insulated, there is forced circulation with a closed circulation system, and then the volume of coolant is not so big. But, nevertheless, all this did not help in any way.

The biggest thing that I managed to squeeze out of the coolant is a temperature of 65 ° C, and so it rises no more than 50 ° C, and it lasts only 2-3 hours. In general, the boiler will have to be changed, it did not live up to all my expectations. Only tormented with him, the quality is not the best.

High-quality welding, cast iron grate, it is convenient to remove the ash

Bad design. It does not give the declared power, an inefficient heat exchanger, huge heat loss, it is impossible to install a draft regulator, it is impossible to clean.