Infrared underfloor heating

We live in the country from the end of April to October - until the "white flies" fly. It is cool at night, therefore, in order not to include full heating, we decided to install underfloor heating. The choice fell on film infrared, because it is easy to install them and there are now energy-saving technologies (like energy-saving bulbs, this is what you need to save money).

They chose for a long time, read reviews (in the end, they realized that half of them are written by the manufacturers themselves), talked with neighbors and we were advised to opt for Neoclima film infrared floors - in particular, they chose completely self-regulating infrared floors Neoclima Carbon +. There is an analogue, but much more expensive (this is Kaleo Platinum thermal film - it is more expensive, and also the same).

In general, they bought (they gave us a small discount and a temperature regulator as a gift for the promotion), I installed it myself - everything is put as simple as possible, and connected our electrician in the village. In general, these warm floors are scalded normally! We worried at first that they would not save - but in vain worried. Even our electrician showed us on the device how energy consumption drops when heating - from 230 it fell to almost 50 watts!

And he didn’t get any worse, but on the contrary - he already steamed his hand! In general, we like it, now there are no problems with heating in the off-season, we recommend using them to everyone who does not want to pay big bills for electricity, but wants to get maximum comfort for their money.

It’s very easy to install, it really saves electricity, we got a thermostat as a gift and we got an additional discount for the quantity (we installed this floor throughout the house - two of our bedrooms and our children, a hallway and a children's granddaughter), the price is of course a little more expensive than if you take a regular thermal film but in the end, this difference was cleared for us in 2 months.

Now we save and earn!) At the neighbor the usual film eats three times more! By the way, it turned out cheaper than the similar sex at the company koleo - we gave cheaper for 9 thousand it turned out. Decently!

Did not notice

I installed it myself in a village house in the kitchen (combined with the living room) under the tiles on the insulated ceiling, a reflective screen, an IR film floor (Korean 150 watt.m2), a protective film, ATsL, tile. Through the thermostat, I’m very satisfied, a large film power is not needed. For the period of absence, I turn on through the capacitor tank (to reduce power) and the mechanical programmer no more than 3 hours of operation per day (some programmers have this function). In winter, the temperature never dropped below 3 degrees. minimal consumption. I planted home-made terminals on the film with clerical grommets (a very reliable contact is obtained). I use 5 years no complaints.

Very comfortable, do not get involved in building capacity, from experience I lower it all.

Be careful about electrical safety, the phase in your floors, do not spare money on RCDs.

We have a corner bedroom and, in addition, this room has a huge window, so in winter we had to save ourselves with heaters. But in addition to the benefits of this technique, there is a lot of harm, so I had to abandon the heaters in favor of Tepletto infrared warm floors.

For ourselves, we chose a film floor, since the draft floor is made of wooden logs. It must be borne in mind that the film floor can not be installed under furniture, it can simply overheat from such pressure. Therefore, it is best to install it in a free space from furniture.
The specialist installed the floor for us, the work is not complicated, but it is better to entrust it to a professional.

The quality of the floor pleases, it perfectly heats the floor, at the moment we use it a little more than 2 years, it suits completely. I will advise the floor, it’s convenient, warm and practical.

easy to stack, very thin, does not burn oxygen

do not lay under the tile.

A little over a year ago, the Unimat HR-S-100 rod infrared floor heating was installed, with a total area of ​​35 square meters. Installation was made in my country house. Programmable thermostats were installed in all rooms. The floor was first turned on after about 1.5 months, since the installation was in the summer, and there was no need for a warm field.

At first I liked everything, on average per month, an additional 400 rubles per day burned for light. But then the problems began. after about 9 months, he stopped heating the floor in the bathroom. Then in the kitchen the floor became unclear how to warm, in different zones the temperature was different, and solid. And after a section of the floor, together with a temperature sensor, ordered to live for a long time, the wrap of light increased sharply. So there is no question of any savings here. 15 year warranty? Bullshit full of floors and a year did not work normally.

Not

Broke, there can be no question of any guarantee

Last summer, a loggia was insulated and decided to make Caleo warm floors there. Mounting it is easy enough, so if you have the desire and the hands, then you can handle it yourself without difficulty.

Although the floor is laid without screed, only under the floor covering, we were advised by a familiar master to install a protective film on the mounted floor, which protects the floor from moisture when the tile laying process is in progress. After completion of all work, the floor was turned on only a month later.

In winter, they warmed themselves with the floor without problems. In the city there is an official representative from whom you can buy components without problems. The only thing we took separately is a temperature regulator, we have chosen for ourselves a more functional and modern one. The floors are good, they heat up perfectly and evenly, we are satisfied with their work and we advise you to purchase.

Quick and easy to install! Safely.

Cost and monthly bills.

I live on the first floor of a multi-storey building, the basement is naturally below. It is for this reason that my apartment has cold floors all year round. Living with this is not at all comfortable, so I began to look for a solution to the problem.

On the Internet I saw an advertisement for the infrared floor of ThermoDAR, I decided to try to install them. Bought styling done by a specialist. I have been operating floors for over 2 years and I am honestly pleased with them. The temperature heats up quickly and holds without problems. Basement dampness disappeared, legs are now always warm and comfortable, I forgot about slippers for a long time.

I don’t say that I consume energy, that my old oil heater ate a lot more, now the bills are smaller than before. In addition, the floors are so safe for health, which is also a plus. The temperature regulator was included. A 15 year warranty, in general, I recommend ThermoDAR infrared floors.

Energy saving, low cost, durability.

You can’t install it yourself.