Hammers Ermak

I bought it in 2011, every 3 years I change the brushes, once a year I put grease into the cylinder, drill 22-meter-high walls with brown, beat it with a 60 mm spatula so that it flies out on the brick floor - SUPER-RECOMMEND

Reliable powerful enough compact plus 4.3 joules in shock is not a joke.

NOT.

I have my own construction business. I have been working with Ermak punchers for 3 years and am very pleased with this tool!

Practical and not expensive.

not.

I am engaged in small construction (master at home). Since my activity did not go uphill, I bought an inexpensive Ermak PRV 30 1050. A convenient handle that does the job just for fun. In the kit everything that was useful to me in my profession for the first half a year, a few Boers and a peak, brushes and a cartridge, then I had to buy it. I have been working with him for the second year. I can’t say that I use it every day, but once a week for sure. I think that I made the right choice, inexpensive, but it justifies itself in the work.

Inexpensive, high quality, lightweight and practical

not yet discovered

I work in a construction company, in the direction - dismantling. To facilitate the manual labor of his assistants, he purchased two Yermak PRV 36 1500 punchers. Punchers have been in operation for 6 months now, they are mainly used to remove a layer of plaster or tile. It removes the layer data with a bang, for all the time the brushes have never been changed (for the sake of interest I untwisted the body of the perforation and looked at their condition). Immediately after the purchase, we decided to check the operation of this unit, when they began to drill a hole in the concrete, the hammer began to make rather strange sounds. Having disassembled it, we found that it was completely unlubricated and the “active” parts worked “dry”. After the lubrication, everything worked perfectly!

hammering "from the heart."

there was no factory lubrication.

I bought Ermak PRG-20/500 for home use, and therefore I chose one of the most inexpensive models. He cost me 2300 rubles. The hammer is packed in a plastic container, of good quality, the kit also has three drills for drilling concrete, a key for a chuck, a chuck for conventional drills, a rubber chip catcher and several spare brushes. It also has a reverse, you can work in 2 modes, there is a speed switch.

It is perfect for home use, I would not buy it for a professional, the gearbox heats up very quickly, you will need to constantly take breaks.

The puncher’s good qualities include light weight and miniature dimensions, you can easily do delicate work with it, and don’t be afraid to split the drilling area. And at the height of working hands do not get tired at all, due to the low weight. For work at home and at the cottage, he helps me a lot, I found him a use.

It’s cheap, the most for home.

For a professional it will be too weak.