Hammers Fiolent

Very high quality punch. I’ve been working for 5 years and never let me down. It’s a very powerful and hardy machine. I worked for 3 hours each with a tug of endurance. This beast warmed up of course, but you can work in it almost without smoke breaks. I bought it on the advice of my friend and did not regret even once.

Very hardy quality device, price, power, inexpensive parts.

There is none of them!!!

Worked for one week then it started spinning badly then jammed

While working, he suited me

Spoiled quickly

I have been using the Fiolent puncher for about six months. I decided to buy a hammer when I moved to a new apartment without repair. My original goal was Bosch. But after talking with his friend, a professional builder, I bought a P3-1200 and did not regret it.

The quality of the punch is not inferior to branded manufacturers. Convenient and very easy to operate, multi-functional. Many devices have plastic gearboxes, the teeth of which wear out quickly under heavy loads and (attention) the warranty does not apply to them. In the Folent punch, the gearbox is metallic. Cartridge replacement is also possible. Analogs of Bosch and Makita are several times higher than the price of this tool. And their repair in the service center will result in a pretty penny. He tested the puncher as best he could at home. I drilled, hollowed concrete walls and ceilings (panel house), I’m not afraid of dust, the main thing after work is not to forget to clean it. With such a hammer drill, work is a joy.

Low cost, reliability.

Not

I am a professional builder. And I use a puncher daily. Many devices of various companies have passed through my hands, from cheap Chinese to expensive German. Now I use the Fiolent punch, and that's what I want to say. In my opinion, this machine is the most reliable. Yes, it is slightly inferior in design to German and Japanese counterparts, but in quality superior to them. The device is universal. They can do absolutely all the work. This device has a smooth start and stop. The rotary hammer is also equipped with a special vibration damping handle, which helps a lot during long work. I would like to pay special attention to protection against dust.It is done correctly, and the effect is not long in coming. The device can be independently maintained. The housing is easy to disassemble and there is free access to the bearings for their lubrication.

Pros: reliability, rugged case, protection against dust and vibration, the possibility of independent maintenance.

Cons: no.

I met the P3-1200 model puncher of the company Fiolent for the first time at work. My work is related to construction, the volumes are large, and he showed himself only on the positive side. For example, they had to perforate more than 400 holes, 24 mm in diameter, in the hot period of summer, when the temperature went over 30 degrees, he did not fail me. Of course it overheated, had to be interrupted every 30 minutes, but nevertheless he performed the work at 5+. Sometimes the device jammed when reinforcement came into the depths of the hole, but it has protection against large overloads, so I had no problems with this.

The device is simply excellent, according to its capabilities it is fully consistent with Makita or Bosch, but the price of Fiolent is much more attractive, so everyone will make the right choice for themselves when buying. On YouTube, I found a detailed review of this model, anyone interested would be very useful to see.

Reliability, practicality, price.

Not.