Royal Thermo Radiators

We bought an apartment with a floor window on the balcony. Previous apartment owners used a conventional radiator on floor brackets. We decided not to take up too much space and not interfere with the flow of light, to install a vertical radiator on an adjacent wall. There are not many options for such radiators on the market, they chose a Pianforte bimetallic radiator for 22 sections, it looks cool, but everyone knows about reliability (inside a steel manifold, a 25-year warranty) and the ability to choose from 3 colors.

Heats the room well, high heat dissipation

not yet discovered.

I decided to insert my "five cents" about radiators. We chose for a new building, as usual, developers do not bother and put the cheapest water convectors. He took the foreman and went to choose radiators, eventually opted for Royal Thermo bimetallic radiators, for reliability the foreman said that everything is fine, you can take it and said that the radiator is completely steel manifold, so the radiators are given a 25-year guarantee. We chose the right number of sections, brackets, valves, valves, all the way the same company. The main minus of radiators, when we arrived at the house, the elevators were broken ... I had to lift them on foot, I always remember how they dragged the radiators, and if they were cast iron, they would throw them out on the first floor right away)

Full bimetal, quality of materials, price

I had to lift on foot to the 20th floor)

I purchased this radiator in Leroy Merlin, installed 6 sections in the kitchen studio. The price is average. When installing, there were no problems, everything is fine with the thread. I didn’t hide the packaging. I must say that I reread a lot of reviews about different manufacturers, I decided to take this particular company. I can’t say anything about the technical part, because There is no heating yet. But the design is simply pleasing to the eye)) !!!

Design looks very good !!! No obvious defects in appearance and thread were detected.

Not detected yet

We have a high-tech style apartment.When we just thought over the whole design, we took into account all the little things, right down to the radiators on the walls. My husband looked in terms of quality, and I was looking for something original. Both of us liked the Royal Thermo brand radiators.

The husband said that these radiators have very high heat dissipation and they are very reliable because of the steel pipes inside the radiator. The placement of radiators was considered only standard, under the windows, since the pipes had already been let down. I liked the Biliner series of radiators - they are such an unusual, directly futuristic design.

Specially went to a specialty store to look at these radiators near. In reality, they look even more beautiful than on the sites that they watched. The consultant also suggested to us how many sections for each room it is better to take such radiators.

Our bedroom is small and for her we took a silver radiator from 6 sections. And for the living room they chose a radiator in Noir Sable color with 12 sections. The color is multilayer, it is clear that such a radiator will last for decades. This year the apartment was very warm, we even reduced the water supply. Really high-quality radiators!

high heat dissipation. reliable.

not

The Indigo 500 was recommended to me as the most powerful latest radiator with reverse convection. The heat dissipation of this radiator is 185 watts per section. This radiator is completely aluminum, and aluminum gives off heat faster than any other metal, and this convector also uses the effect of convection when air rises through the fins.

Another feature of this radiator is an additional fin on the vertical collector, which increases heat transfer by 5%. Having learned about such features of this radiator and about the company guarantee of 10 years from the manufacturer (by the way, the manufacturer not only gives a guarantee for 10 years, but also insurance of $ 1 million, which means that the manufacturer is confident in the quality of its products), I decided install these radiators on the 3rd floor of your house, since it is there that there are 2 bedrooms in which for some reason it is constantly cold.

I bought 2 radiators in 6 sections and one for 10 sections. For each section separately there was a warranty card and passport, which was very surprising. After installing these radiators in the bedrooms it became much warmer. If earlier the temperature hardly reached 18, now it fluctuates around 23 - 25 degrees.

It gives a guarantee for 10 years and insurance of $ 1 million, this radiator uses the effect of convection when air rises through the ribs.

not

I understand radiators quite well and I know that with bimetallic manufacturers they often trick, save. Royal Thermo does not have this, in support of this a guarantee of 25 is given !!! years old. Their collector is completely (and not partially, like some others) steel. That is, aluminum does not come into contact with water, which becomes the key to long-term operation without leaks, even with water hammer.

As for heating, I can also say with confidence that each section is warming up perfectly, and quickly enough. Their appearance is simple, but all with a “twist”, as they say. Ribs slightly curved. It seems to me that this is not only for improving the appearance, but also for better heating. Well, another plus, the paint is good and durable. We have been using 4 such radiators at home for 3 years now, we don’t need to tint anything anywhere.

quality, 25 years warranty

simple appearance

I have been installing heating radiators since the beginning of the 2000s. I install, I advise clients, I know all the pros and cons of each company. As soon as the ROYAL THERMO radiators, both aluminum and bimetallic, appeared on the market, I immediately drew attention to them.

I install bimetal radiators in apartments with central heating, because the radiators have a completely steel collector, which avoids contact between the coolant and aluminum, which increases the reliability of radiators. I mount aluminum radiators in private houses. Radiators are manufactured in our own factories in Russia and Italy. Now I switched only to them.

reliability

are excluded

For the cottage they bought Dreamliner radiators about 2 years ago, great! No operational problems were caused. The installation is also quite simple, by the way. What do I want to say right away? For a private home, aluminum radiators I think is the ideal solution, especially from Royal Thermo.

Price, possibilities for ordering a radiator with the desired number of sections (in my opinion, the maximum is 10 or 12). We have 8 and 10-section ones.

Not found in 2 years of operation.

We have had Biliner radiators for many years now. I can immediately say that they are 100% coping with the main task, they warm the rooms well (we have them everywhere: in the kitchen, in the bedroom and living room), they look concise, pretty We replaced them with cast-iron, as we decided to radically change the interior. Warm not worse, but they look much better.

Heat dissipation, appearance, price

not

Enough of these radiators for 5 seasons, joints flowed, all the nipples rusted through and through.

Beautiful

Poor quality.