Norman is a unique metal tile coating that provides it with special performance characteristics. The Norman metal tile, reviews of which are presented below, has a polymer layer of 25-35 microns. The coating gives the metal tile a glossy shine and durability, and a variety of colors will allow you to choose a shade suitable for the exterior of your home. Norman coating is resistant to sunlight, mechanical damage and has enhanced anti-corrosion properties. All these characteristics along with an attractive price make it popular among buyers.

Metal Norman

Good ratio
A comment
I have been engaged in construction for a long time, it was the case and I had to work with Norman coated metal tiles. I will say this, of course, there are better options, but in terms of quality and price, not a bad tile. Norman is, first of all, the 2nd class of galvanizing, so you should not initially expect from it above the natural, 140 g / m2. Such a tile serves easily for 20-25 years, 1 class will serve the owner from 40 years, the difference is obvious.

Such a tile serves quite acceptable, I have not heard complaints, people were satisfied. Quite a good budget option, which can serve you more than 1 dozen. By the way, the guarantee for this coverage extends for 10 years, also a nice addition. Working with such material is easy and pleasant enough, everything is done very quickly. I recommend a look at the Norman coating.
pros
Not a bad option for a budget solution
Minuses
2 classes of galvanizing
Term of use
more than five years
Recommendation to others
I recommend
  • Quality
    3/5
  • Practicality
    3/5
  • Price
    5/5
Show more
Metal Norman - beauty and reliability
A comment
Last season, our team was very lucky, we got a large order for the construction of the roof of a country house (2000 sq.m). The customer was not demanding and therefore immediately agreed to our proposal - to make a roof with Norman metal roofing. According to its parameters and properties, it was most suitable for the construction of such a volume (price-quality ratio, durability, strength, 10-year warranty).

Our team has been familiar with the installation of this roof for more than a year, and we boldly set to work (by the way, suppliers make a good discount when buying a roof of more than 100 square meters). The work was in full swing, the sheets stacked quickly, without any difficulties. A week later, our bright blue roof was already pleasing to the owner!
And once again we were convinced that our metal tile is no worse than the famous Finnish!
pros
easy installation, matching price - quality
Minuses
Hardly ever
Term of use
more than one year
Recommendation to others
I recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    5/5
Show more
The Norman polymer-coated metal tile is fine!
A comment
In the autumn of the year before last, my father and I repaired the parental home. The roof had to be changed completely. There was no doubt that it would be a metal tile, but the problem was with what kind of polymer coating it should be taken. It was not easy to choose the material: there are many offers, all sellers praise their goods. Is it possible to believe them? Well, the Internet is there, and among friends there were comrades competent in this matter, they helped with advice.

As a result, a Norman-coated metal tile was chosen.
According to the description, it is quite durable: 0.5 mm of metal and 25 microns of polymer coating. Made of hot dip galvanized steel, galvanized on both sides. The parameters are no worse than Finnish tiles, and our price is affordable.

A year and a half passed, the parents were satisfied with the new roof: she passed the “strength test” perfectly.
pros
reliability, durability, reasonable price
Minuses
not detected
Term of use
more than three years
Recommendation to others
I recommend
  • Quality
    5/5
  • Practicality
    5/5
  • Price
    5/5
Show more

Copyright © 2024 - techno.techinfus.com/en/ | chinawebteam2014@gmail.com

Technics

Tools

Furniture