Greenhouse Agrosfera

A good greenhouse, measuring 6 by 3 meters, the frame is a galvanized pipe, and indeed all metal parts are coated with zinc for durability.

I collected it with my brother in about forty minutes, in principle, not for long, assembly instructions are available.
It keeps the heat well, no worries and hassles arise with the greenhouse; we installed the possibility of automatic watering in the greenhouse. The model itself is good, wear-resistant, once bought and forgot!

easy to assemble, polycarbonate coating

polycarbonate is not the best quality

Last summer, I installed a greenhouse on a summer cottage. We collected it with my son slowly and, surprisingly, met it in half a day. The design is intuitive, all technological holes in the right places.

The greenhouse overwintered perfectly. The frame heats up like a radiator from the slightest gleam of the sun, melt the snow, and that layer moves down from the roof. It is only necessary to throw it away from the walls.

I especially want to dwell on the anti-corrosion coating. Definitely need to take a greenhouse with a galvanized frame. After almost a year on the pipes and profiles not a single speck of rust. The neighbor’s frame is powder coated. This year, I ran around the greenhouse with a brush and tinted rusted places.

excellent greenhouse, thoughtful robust construction, galvanized profile

only 3 amplifiers are included, you need to buy at least 3 more

Agrosphere Titan UTC-67 40x20 6m. Successful design, high-quality materials - galvanized pipe, all-sound profile with anti-corrosion coating. If there is a screwdriver, it is assembled in 3 hours. When assembling the structure, all the holes are exactly in place, but when hanging doors and window leaves, I had to drill almost everything, which I categorically did not like. Old holes, for tightness, filled with silicone. When attaching polycarbonate sheets, there were no problems either.
Another warning, when installing the door and vents you need to buy short screws. Those that come in the kit drill through the profile. This causes damage to the zinc coating and can be scratched a lot.
There are no grousers and there are only 8 of them per 6 m long greenhouse. It goes 4 to the side, and the average wind blows off such a design, so you need to install it on the foundation from the beam, at least.

if you don’t find fault with the little things, then the greenhouse is good, it gave an excellent harvest

in the presence of straight arms everything is fixable

I bought a greenhouse last year. During the assembly process, it turned out that the thickness of the metal instead of the manufacturer's 1.2 mm 1 mm. The store did not respond to the claim, sent to the manufacturer. As a result, I had to strengthen the frame additionally. Strengthened with metal scarves from the corner. Once the greenhouse has already wintered. I can’t say that the winter was especially snowy, but the design withstood the load without stirring. The result, be sure to take with a step of arches of 0.5 m. That would not fill sellers about loads of 100 kg, to strengthen additionally or to put supports under the knots of strength inside for the winter.

Now about use. Keeps heat perfectly, drags in a few barrels of water as a heat accumulator. He began to plant radishes 1 month earlier. Harvested onions and herbs before planting cucumbers and tomatoes. Satisfied with the result of use.

During the year of operation, there were no special flaws that could not be dealt with quickly, high-quality galvanization, no rust anywhere, reasonable price

Not found

Last year, the old wooden greenhouse fell into disrepair and was dismantled. There was a foundation and a strong desire to buy a new one. There are a lot of greenhouses with polycarbonate coating on the market. We chose Bogatyr from the agricultural sector, which is suitable in size to the old foundation of 6x3m. Ordered via the Internet, delivery is fast, brought directly to the country. Collected together with her husband according to the instructions and with the involvement of the Internet. There are several videos with demonstration lessons. All metal parts are zinc plated. Holes have already been drilled in the right places. The frame itself was assembled very quickly. Carried much longer with the installation of polycarbonate sheets. Included were 4 sheets of 2x6m. on the sheets is a protective coating on which the instructions for use and any useful information are indicated. From it we learned that this particular polycarbonate has a minimum life of 5 years. According to the instructions, the protective film was removed after installation. It was removed from the ends normally, but it would have to be removed from the roof before installation, it is much more convenient.

fast, assembled, easy, convenient, cheap

it starts to round off just 1 m from the ground level, it hides the internal space, you can’t plant anything high near the walls

Those who have a wooden greenhouse in the garden know what the annual ritual of film coating is. I finally persuaded my relatives to invest in a factory greenhouse under polycarbonate - 6x3 m. I had access to freight transport, so I didn’t order via the Internet, but I bought it directly in the store and immediately took it to the place. They were assembled together, it took 1.5 hours to assemble the frame, and about the same time for polycarbonate coating, but already three.

There were lugs in the kit, but we did not use them. The frame was installed on a larch beam 10x25 cm. The tree itself was soaked three times with used oil. Dug half the thickness into the ground.Polycarbonate sheets were fastened not with screws, but with a metal tape so that it could be easily dismantled. All holes are filled with lithium grease for tightness.

set and forget about the annual dances with a tambourine (film)

not detected

I tried to find a greenhouse from the manufacturer. I came across an advertisement exclusively of dealers. The difference in prices is about $ 20. Ordered a greenhouse at the same time as a neighbor. It is produced in Belarus and the Russian Federation. They brought from one warehouse in one machine. The wall thickness of the profiles is 1 mm, and not the declared 1.2 mm. The same story with polycarbonate. They promise a density of 0.7, but good if 0.55. Polycarbonate 4 mm thick manufactured in Belarus, as indicated on the protective film, although resellers swore that the production of the Russian Federation.
Now about the design itself. Metal and galvanization are of high quality, and several arcs were also in oil. All bolts, nuts, self-tapping screws are present in the required quantities in as many as five boxes. The instruction is incomprehensible and it is not needed. The assembly resembles a game with a designer, all holes are drilled, it remains only to insert and tighten.

the ends are already welded and ready to install, high-quality metal and anti-corrosion, fast delivery and reasonable price

mismatch between the thickness of the profile and polycarbonate machines, take 0.5 m in increments of arcs.