Geysers of Beretta (Beretta)

TESTED for 6 years!

The quality of the geyser BERETTA _ disgusting !!!! Do not get fooled by advertising! This is a horror that does not work !!! Constantly breaks down, and requires large cash expenses to repair !!! DO NOT BUY!

Before that there was a Polish column - Termet, which worked from 1998 to 2011, without complaints. But after some block flew in it, they thought it was more profitable to buy a new one ... they bought Beretta on their own head ... crappy quality, it heats the water terribly badly!

Appearance.

Disgustingly heats water, in winter it is necessary to reduce the pressure in order to at least slightly warm the water ...

My parents use the Beretta 11i column, I can say right away that it works flawlessly. In the area where the parents live, they constantly turn off the light and it is not advisable to install a conventional double-circuit boiler, therefore they put a separate boiler, a separate column.

Now I’ll tell you more about the column. The draft in the column is natural, there is a chimney. The dimensions of the gas column are not quite large, it looks compact enough, does not protrude too far from the wall, in principle, does not interfere and the eyes are not callous.
It is made of metal, a heat exchanger is made of copper, so it will last a long time.
The column operates in automatic mode, that is, it automatically turns on immediately from the moment hot water is supplied. Set fire to electric. For the shower, the water productivity is 11 liters per minute, but if you need to get a bath, then there are about 6-5 liters.

Quality, performance, simplicity, reliable.

Hard to find for sale

An ancient geyser was installed in the apartment, it worked every once and noisily, and most importantly it was completely unsafe. After talking with her husband, they decided to buy a new one for her. It was difficult to choose, but I trusted the reviews of people and we bought a Beretta IDRABAGNO column, which I do not regret at all.

The column is economical, consumes gas only when water is being drawn. It does not have a constantly burning wick, thanks to the piezo ignition function.
The cost of the column at the time of purchase is 10500.

I also like that the column does not depend on external power sources, in my opinion, it is quite convenient. Gas waste is vented.
The production of hot water in accordance with the consumption in our family is 14 liters per minute, a good indicator. The column is worthy of attention, it works without problems, it has never been cleaned and it is not clogged.

excellent build, quiet, runs smoothly

price

I opted for the Italian gas column from the brand Beretta Idrabagno 11. It is quite bulky, the dimensions are 61.7X31.4X24.5 cm, it weighs 13 kg.
I like the column, and I think its cost is fully justified. After all, the main thing in geysers is safety, and here all the conditions are met very well. The column is good, I recommend it to everyone.

- good performance - 11l / minute;
- consumes 18.9 kW;
- turns on using piezo ignition;
- power can be adjusted smoothly, there is a modulation burner;
- water heating is independent of water pressure;
- management is simple, both a schoolboy and people of age will be able to deal with it;
- there is a self-shutdown mode;
- there is a temperature control system;
- there is a system that controls the health of smoke removal;
- for all the time there were no breakdowns.

- sizes.