Using a manual milling machine, you can perform complex processes, making furniture and other objects from wood. In addition to a high-quality device, you need to get good equipment. The best wood cutters with AliExpress presented in our rating have many positive reviews from customers who have already tried them in practice. This will help to purchase proven products and save money.
The best manufacturers of wood cutters with AliExpress, which you can buy individually
Often, an experienced master already has a set of milling cutters and occasionally it is required to purchase only certain types in order to expand his methods of wood processing or replace already worn out equipment. In this case, products sold individually will help to save. Here are the best manufacturers of wood milling machines with Aliexpress, whose products are sold separately on the Chinese trading platform.
Cutters CHWJW
This is one of the best manufacturers of Chinese cutters on AliExpress, whose products have numerous positive reviews. It produces tooling for milling cutters with a shank diameter of 8 mm, which is suitable for most equipment models. But there are 6 mm shanks, as well as models with sizes ½ and ¼.
+ Pros of CHWJW
- Many models are made of carbide steel, which is suitable for processing hardwood.
- The goods sold are individually packed in plastic cases, therefore, the integrity of delivery is guaranteed and convenient for storage.
- Much cheaper than European or domestic counterparts.
- Symmetrical edges of the cutting edge.
- Sharpening without notches, smooth.
- Cons CHWJW
- Most often, carbide milling cutters of the prefabricated type - under excessive loads, the cutting edge may fall off and the equipment will have to be thrown out.
- Not always the actual dimensions of the cuts from the edge correspond to the declared.
- Sometimes cutters with runout up to 1 mm come across, which facilitates sampling with a different size and interferes with additional vibration.
Output. The range of this manufacturer is one of the largest. A wide selection of slot milling cutters is presented both for an even selection of recesses for shelves and for decorative elements. Figurine horizontal milling cutters are available with the most diverse width and shape of the cutting edge. Combined cutters are available for selecting one or five spikes at once to firmly connect wooden parts. Edge options are distinguished by embossment for a beautiful finish on the edge of the board under the frames, skirting boards and cornices.
HUHAO Milling Cutters
Another best manufacturer of Chinese milling cutters on AliExpress, whose products have hundreds of positive reviews from customers. Its products are more diverse in terms of shank size - all types of cutters can be found with shank diameters of 6-8 mm and even 12 mm. Available for making straight grooves with a length of 10-30 mm, fillet, V-shaped and trapezoidal.
+ HUHAO pros
- Hard alloy products of cobalt and tungsten.
- There is an additional coating that protects against corrosion.
- Large range of cutter lengths.
- Different sharpening angles for beautiful machining from 60 to 120 degrees.
- Most items are shipped in plastic cases.
- Holds a sharpening for a long time.
- Fiberglass is cleanly milled.
- HUHAO Cons
- There are no monolithic mills.
- Few models with replaceable cutting edges.
- Some cutters come in a blister with a cardboard base and can be hit by the lower edge of the cutting edge during transportation.
Output. A lot of edge milling machines are presented on the trading platform, among which there are even cutting parts, molding with one or more steps, convex and concave. But the rebate cutters from this manufacturer are much smaller.
The best sets of wood cutters
To immediately get everything you need for a variety of workpiece processing, it is practical to buy with AliExpress sets of mills for a manual milling cutter. They already present the necessary options for the types of equipment, and the box from the kit will allow you to store everything in one place and carefully transport if necessary.
FivePears WYL0002
A good set consisting of 12 cutters (6 pcs grooved and 6 pcs edge). Comes in a beautiful wooden box with a metal lock.
+ Pros of FivePears WYL0002
- All cutting edges are made of alloy with tungsten and can withstand increased load.
- Shank diameter of 6 mm is suitable for milling cutters from different manufacturers.
- Small error in size - up to 0.08 mm.
- Hexagon kit included for easy mounting of snap bearing.
- Opposite each cutting element is a piece of paper with a designation of the type of cutter and a visual drawing of what effect it reproduces on wood.
- They are delivered already ground and ready to work.
- Cons FivePears WYL0002
- The suitcase does not have a carry handle.
- During inaccurate transportation, the wooden case breaks and will have to be glued together.
- Some cutters may wedge bearings.
- There are chips on the cutting edge.
- Not for frequent use.
Output. The set is optimal for a beginner and making shelves, drawers, baseboards at home. Six groove cutters will help create recesses of various shapes for joining partitions. The edge equipment will allow you to beautifully design the edges with a bevel, semicircular selection or rounding.
FivePears WYL9664
A set of 35 units packed in a case with a metal edging, locks and a handle. All cutters have an 8 mm shank and are made of tungsten carbide steel.
+ Pros of FivePears WYL9664
- The cutters are neatly packed in a suitcase and signed.
- The kit is convenient to carry.
- 14 grooving cutters for any shape and submersible use in the middle of the workpiece.
- 12 edging for a beautiful edge design.
- Several options for combined cutters to make corner and tee joints.
- During transportation, the cutting edge does not hit the case due to the soft backing.
- Cons FivePears WYL9664
- In places, the soldering of the cutting edge may be visible.
- Cutters with a signed size in inches rather than in mm come to some customers, so you need to get used to it and first check with a caliper.
- Bearings do not always last long and have to be replaced.
- There are few figurine milling cutters.
Output. This is the best set of Chinese cutters for the professional. It is optimal for the manufacture of frames for paintings and photographs, as well as for the manufacture of furniture for the kitchen and bedroom.
Alloet 15PCS 1/4
Set of milling accessories with 15 elements. Shank size ¼. They are delivered in a wooden case and inserted into plastic bushings.
+ Pros of lloet 15PCS ¼
- The cutting edge is heat treated to be harder.
- There is a key for installing a bearing snap.
- Grooving cutters for grooving from 4 to 15 mm wide.
- Great price from 900 rubles.
- The lip is initially lubricated.
- Includes a pad for absorbing moisture.
- Cons lloet 15PCS ¼
- The box does not have a carry handle.
- The quality of painting is poor - traces of paint are smeared in places on the cutting edge.
- Carbon steel dulls quickly.
- The wooden box is fragile and can break when transported from China.
Output. This is a great option for a beginner who takes the first steps in woodworking.
Kitbakechen GJ0459-01
A set of Chinese high-speed steel milling cutters for work in the home workshop. Contains 15 elements with a shank with a diameter of 8 mm.
+ Pros of Kitbakechen GJ0459-01
- There are a number of thin grooving cutters with a diameter of 3, 6, 12 and 16 mm for grooves of different capacities.
- Semicircular cutters are convenient for effective cuts in a submersible way.
- 4 edge milling cutters for convex and concave edging.
- All cells in the set are signed, and it is clearly shown how the milled edge will look.
- Despite the low cost there are no chips.
- Cons Kitbakechen GJ0459-01
- There are no combined cutters in the kit.
- Inaccurate painting - smeared in places, and missed in some places.
- Weak drawer loops that fall off over time.
- Users find traces of rust on a new product.
- Packaging in China is weak - there may be a thin film on the top, - you need to check with the sellers on AliExpress, otherwise you can get a cracked box.
- Sometimes the diameter of the shanks is confused and put 6.25 instead of 8 mm.
Output. The set is well suited for working with softwood (pine, spruce, etc.).
