Hammers Prorab (Foreman)

All these things were bought today by a stock held in a store. I must say they were very surprised, they were afraid to take it a little, but they checked everything, everything works fine and the perfo and welding and grinder, with the same parameters, the same makita would cost several times more, although the same Chinese assembly. For repairs in an apartment in the house, it’s not necessary to overpay a ton of money for a brand.

Price, good equipment, comfortable in the hands, quite a powerful tool.

There is nothing to say.

To be honest, I made my purchase on the principle that it costs less. When he began to work, he was pleasantly surprised, despite the ridiculous price, he has good performance, value for money, at the height. The package bundle is not bad, it has 3 drills in the set, I’ll say right away in quality they are not very good, so it’s better to buy better right away, these are too dull too quickly. Throughout all use, it worked smoothly, there is no overheating like this, plus it is in the length of the cable, no need to run after the extension cord.

He was going to China, but by and large, but, what is now not China. There is a reverse function, 2 modes of operation: drilling with impact and simple drilling. I bought it for a one-time job, the machine is alive, it’s perfect for a home, no worse than expensive rotary hammers, a reliable machine, anyway, is completely satisfied with it.

Cheap, characteristic for such a cost.

Fragile.

I bought a Prorab 2419 punch a month ago. To celebrate the purchase, I decided to check it right away (my wife asked me to hang curtains). It was necessary to make four holes (1.5 cm deep) in the concrete wall of the slab of a panel house. He put the winning drill and began to make holes, the first hole turned out in 4 minutes. Starting with the following, problems have gone. During the drilling of the second hole, the punch began to heat up very quickly, for the same reason the gearbox suffered serious wear, as a result of which the machine jammed. I carried it back to the store, handed it under warranty (I didn’t throw the check well), and in return I took the same punch. I have been using the new puncher for a month, there are no complaints about its work.

cheap price

I got a model with a marriage.

He made repairs at home, and there was no way to do without a punch in this matter. Since I often did not intend to use it, I did not immediately consider expensive models, I picked it up for home use. As a result, I settled on the PRORAB 2408k. I used it for several hours a day, I can’t say how it will behave with prolonged use. But during my work it did not heat up much, light weight, about 3 kg, it’s convenient to work with it

There is a reverse option, the power is not high 680 W, but this is enough for a home, the highest impact energy is 2.4 J. The kit includes a convenient case. into which the hammer can be folded neatly. On the punch there is a useful option, on the handle there is an option to block the inclusion. Several operating modes: chiselling, drilling and, accordingly, drilling with impact. The set also includes an additional depth gauge, shoulder blade, peak, 3 drills.
In general, I want to say, I was satisfied, for the house it is definitely suitable, inexpensive and not bad at the same time.

Not expensive

Low power