Heated towel rails Argo

Argo heated towel rails purchased about a year ago, heats evenly across the entire surface. For all the time there were no problems with him, the appearance did not deteriorate. No corrosion appeared at the joints and joints of the pipes, the chrome coating over the entire surface is intact. I can say with confidence that the Argo heated towel rail is worth the money.

Availability in stores. Warranty from the manufacturer. Large selection of models.

Price.

Obi bought immediately an inexpensive model. Heated towel rail MP Leader. The most common coil, as previously set. Well, a little modified. I don’t understand these complex tricked constructions at all. What if they flow. And here - a bent pipe and all. Reliable. We chose OBI among classmates - ARGO liked the pipe itself - it is thicker and polished, it is clear that it is not mechanical, and the weld is not noticeable and looks great. It is also cool with ARGO that they put quality on products with engraving. Before that I saw without engraving - probably fake. Engraving is somehow more reliable. Well, the price was better. They put us his plumbers in two accounts to the old place. We specially bought old pipes for pipes. When we replaced a new and shiny one instead of the old rusty one, it became light even in the bathroom. In general, in my opinion - the best choice

The engraving of the manufacturer on the quality of well and generally well done. Reliably

No questions so far.

Bought over the Internet, installed. Great thing. It looks cooler than imports - before that they tried on Zender for almost 100 pieces, first they waited 2 months to bring it in and then the smut started - then it doesn’t get on the pipe, then the crossbar does not heat up. Gave back. The Italians began to watch - they are all brass, which is bad for our water. Then they found in the online store a complete analogue of Margarolli - only Margarolli costs 2 thousand euros, and this one is 25 thousand. And made of stainless steel. What is better than brass. They also brought it in 2 days and free of charge. For such money - generally super.

For such money - a super thing

not

Hello. We have been using for a long time been drying from a square profile. Designed to fit the overall bathroom solution. We have a high tech.Round pipes do not look very well. So they were looking for exactly square pipes. There were solutions from different manufacturers, but more expensive and significant. This Sorento liked the cool polish. Just like a mirror. And very beautiful, stylish square valves included. Well, generally done well. Fits perfectly into the hi-tech design. Happy with everyone

Square pipe - looks very stylish

not

We have a very difficult case. First, we bought a cheap heated towel rail from the first manufacturer on the market. I don’t remember which one. Only a year later he began to flow. They just wanted to replace, but they explained to us that if we replace, then it will flow too. Because the water in the house is exposed to electric currents, which cause the phenomenon of electrochemical corrosion in stainless steel products. And they recommended us either not to hang a heated towel rail, or hang an electric one. Here is such an unexpected turn. The electric variant did not suit us very much, because of pipes sticking out of the wall. They began to monitor the topic of how to defeat this very corrosion. In general, if you read, then everything is disappointing. This is not a product problem, but the water in it, and how to deal with it is a difficult question. But it turned out that a couple of companies in Russia are doing polymer inner processing of stainless steel products to prevent electrocorrosion. Including ARGO. They decided to turn to them. They honestly said that the service is relatively new, statistics on it have so far been in its third year, but during this time there have been no cases of repeated handling of damage by electrochemical corrosion. This suited us, especially since the service is not so expensive - about 2 thousand. Three birds with one stone were killed right away - they ordered the custom size we needed, painted it in glossy white and processed the polymer from the inside. Bought Rio perfectly stood on the old cam left from the old heated towel rail. As if always standing there. If anyone is looking for a solution to protect their home from electrochemical corrosion - I recommend

Painting in the right color, custom size manufacturing, polymer protection against electrochemical corrosion

Custom product manufacturing time - 10 days

Water towel rail Floran Station wagon with a shelf. Heated towel rail with a heating shelf. This is exactly what we needed to dry our ski boots. At first they saw it only on the Internet, but not always what is in the picture corresponds to reality. Therefore, we decided to look in the store to feel and measure with our hands whether four ski boots fit next to them)). Found on a tip from the site in a retail store on Expostroy. True, only an exhibition sample was available, but the order was accepted and, two days later, it was brought.

They brought it for free. The driver himself also helped bring home. I got up on standard mounts too without any problems - everything was in the kit. The valve, though in the standard version was a straw, and we bought with a crane with a cross - so beautiful. And in principle, not very expensive. Now we have our own separate dryer for ski trips. The quality is on the level, our people have learned to do and the price is good. It has not been with us for long, but in principle there are no problems yet. Great stuff.

Great design, build quality level.

Not available, had to wait.

The first time I bought a heated towel rail for my repair. The house does not have very new pipes and the pressure from the boiler room jumps - so I chose for a long time and intently. I don’t want to make a flood for the whole house.

I talked to the plumbers, but they praise each lured store, where they have a percentage of the sale.

I went to watch myself. We have a large construction supermarket - it went for a long time, looked, consulted with sellers. I did not want to pay for foreign production right away. As a result, I chose this heated towel rail - I liked it with its appearance and such thoroughness. The pipe is thick, the seams are even. Well, it is cheaper compared to competitors.
He put it himself, since the hands from where it is necessary to grow, and what’s complicated, put two nuts on the pipe. In the kit was all the accessories - only the fum tape wound up and that’s it.

So the fifth month has gone - it’s no problem

High-quality, inexpensive, all accessories for installation in the kit

Box is fragile

We have a small bathroom. There is never enough space. And with the advent of the second child - in general it became a continuous wash-drying and everything was hung up with linen. We already have the MP Leader from ARGO hanging on the wall. We have been using it for 7 years and we got it from the previous owners of the apartment. But he was greatly missed with the birth of his second child. We decided to buy another heated towel rail - an electric one. But where to hang it? There is no place at all. And here on the Internet we read a review about a rotary heated towel rail. And they decided to buy. It is really very convenient - they hung it in a corner, raised the bar to the desired angles, and you can hang it on all four bars. And he consumes 60 watts of electricity in total - like a light bulb in the bathroom. Very comfortable, highly recommend. And when I turn off the water, it still heats, only they are saved.

Very practical, takes up little space, eats very little, does not depend on water

Could be bigger

I doubted for a long time, read reviews, but decided to take a chance. I bought the very Brigantine Argo, about which so many horrors were told. It’s painfully beautiful. Searched for shopping - very expensive. And then I went to the Argo website - they have what they need in the Promotions, and at a very tasty price. Bought - installers praised the choice. They said that Argo has grown a lot in quality. And the end they have now is "rolled up" (whatever that means) and the gasket does not cut. The pipe, they say 2 mm, while others began to sin and put a thinner one. I really have nothing to compare with, but it looks fat. And the seams are better and polished - I can’t comment, but it looks beautiful. In my opinion - a beautiful, unusual option, and what they have gotten better there - time will tell. While standing - the eye pleases.

Beautiful design, great stock price

Heavy

For myself, I always looked for such a heated towel rail that the maximum possible number of items can accommodate. Argo has the Bridge Station wagon series. These products differ from just ladders in that the bars are brought forward. That is, you can hang thicker things, such as down jackets and they will not reach the wall. And on the side outriggers, too, you can hang every little thing. And in my model, Liticia can also be in two rows - there the crossbars are moved forward at different distances and clothes can be hung in two rows.

Before that, there was already a simple coil from ARGO. Well, it was decided to replace with a more advanced, but from a trusted manufacturer.

Of course, over the past two years, Argo has gone far in quality. Now their end is bent and polished to create a flat area for laying, and the sharp edge of the pipe did not cut anything.
They have a pipe thickness of 2 millimeters, while others even feel the weight that the pipe is thinner.

In short, it is reliable and I liked the design with its functionality.

Functionality, stylish design, workmanship.

While they were transported by the transport company, the box was badly damaged.