Acrylic bathtubs

Quality bathtub in white. There are no smells. We have been using it since 2017. Easy to clean. Hydromassage brings a little trouble, since you have to thoroughly rinse everything. But the children are crazy about bubbles, so I suffer))). bought on the Radomir-online site.

not noisy, heats up quickly and keeps warm.

not found

I made an order on the acrilvanna.ru website for 10 am, the master was late for more than an hour. I chose an expensive fill that dries in 8 hours, as it was written on the site. The master made a bay, installing a sink in the evening, said that in a couple of hours you can swim, he left. And in the end, when after 10 hours, and not the declared 8, I got into the bath, it became clear that nothing had dried up.

When I called the company, I heard that the conditions must be somehow unusual for drying out and that it was my own fault, that nothing had dried up and they hung up the phone. At the same time, 6 thousand rubles were removed from me for the most expensive and quick-drying coating (8 hour). Do not go to this site if you do not want to lose money and be left with nothing.

No pluses

Rudeness and impunity

Immediately after moving to a new apartment, they began to make repairs in the bathroom. The bathroom was installed acrylic corner from the manufacturer Polla Dolce. More than 6 years have passed since then, the bathroom is satisfied today.

- the bathtub is incredibly light, especially when compared with cast iron;
- perfectly keeps warm temperature;
- dirt or dust does not accumulate in it;
- when there is a set of water, the bath does not make noise at the same time;
- the scratch that has arisen on the bathtub can be cleaned without problems with a solution of acrylic, which is not difficult to purchase, by the way, it is in any major hardware store;
- does not slip, it is safe in it;
- even after 6 years the bath did not lose its luster, it did not turn yellow;
- simple and easy to install;
- water in an acrylic bath is in contact with the body, it is able to keep the temperature.

- it can be easily scratched (but it is easily fixed).

The bathroom is a favorite place in my apartment, I spend almost all my free time in it. Here I can not only take water procedures, enjoy and relax, but also be alone with myself. Therefore, when I needed to buy a new bath, I took the matter seriously. Most of all I liked the acrylic bathtub from the company MARK 1.

I liked the classic model: a deep bath with the correct drain angle. Width 70, length can be selected in the range of 150-160-170 cm, depending on what you need, I chose 160 cm for myself. The design has armrests with which it is convenient to get out of the bath. They are cast, they have no corners, so it’s safe for children. Even at the time of purchase, they presented a bath pillow, which is convenient to use and can easily be put on the bath.

It’s easy to take care of her; she’s not demanding in a boot. I clean it with liquid soap and a soft sponge, everything is washed without problems.

Quality, price

Practicality and fragility of the material

We moved to a new apartment and began to make repairs, a new bath was needed in the bathroom. We needed a rectangular bathtub, long and with an interesting design. Santek bathtub, they saw the mu in the store and could not pass by it. Plus, the price turned out to be normal - 14000. And the fact that it is acrylic was very pleasing, so acrylic keeps heat well and is almost noiseless.

Before installation, the husband carefully checked the acrylic, shone it with a flashlight, no gaps, the thickening is good, in general, the quality is decent.

The bath has been in operation for 1.5 years, it is still unharmed and intact. Acrylic is as good as new - it has not stained, not yellowed, has not been scratched, and we have 2 children and they do not care about him at all.

And in the configuration there is an automatic plug, a very convenient thing. In order to close the drain, you just need to turn the disk with the manufacturer's logo.

Stylish, durable, simply high-quality bathtub.

Clean with special tools.

A bath from Bas, a Sagra model, has been with us for more than 6 months, we bought it when we moved to a new apartment. The bath is really like our whole family. It is made in Russia, Moscow. Dimensions are good - 160X100 cm, usable volume 285 ml, corner bath. It is very spacious, bathing a child is a sight for sore eyes, places to swim in plenty turns out.

Material - acrylic, there is a bathtub on a metal frame, there are also legs with height adjustment. The bath is very roomy, large, it has a special recess in which it is comfortable to sit. Acrylic keeps heat perfectly, it does not get cold in our bath, even when it is not filled with water.

Acrylic is a very good material, it does not turn yellow, caring for it is quite simple. We clean only with liquid products (we do not use abrasive materials) and a soft sponge. We advise everyone to acrylic bathtubs, this is a great choice!

The shape of the bath is interesting, holds heat well, comfortable

Price

More than 5 years have passed since we installed in our apartment an acrylic bathtub, brand Triton. Acrylic has both a number of advantages and disadvantages. But despite all the nuances, we believe that this type of bathtub has adequately taken a leading position in the market - this is a worthy alternative to proven cast iron or aluminum. And we do not regret buying.

- a huge selection, the range of bathtubs is simply amazing, a lot of forms and variations of the bathtubs;
- pleasant to the touch, acrylic does not accumulate a coating of lime on itself, does not become rough, porous over time;
- the acrylic bathtub looks very worthy;
- convenient to use;
- easy care, all spots are easily and quickly washed;
- keeps warm for a long time;
- you can install it yourself, such a bath weighs quite a bit.

- acrylic is easily scratched;
- a very fragile material, can easily break if a heavy object hits it.