Borinsky heating boilers

Automation and burner are beyond criticism. They just don't do it. Their main masterpiece is the boiler itself. Drilled from metal that corrodes in 3 years. There is also a design jamb of this product.

If you weld the boiler yourself from a stainless steel and turn off the draft sensor, then even with this arrangement everything will work forever.

Not

If you want to temporarily interrupt, about 3 years, then buy

AOGV 23.2 Borinsky, gravitational, the main mode of operation is 2-4 on the wheel (40-60 degrees C). I worked for 3 years and three months without any problems. Flowed upstairs at the place of welding of the vent pipe and stove. Moreover, different leak rates are from 0.3 to 2 liters per day. For a long time, nothing was visible below him, that is, even with a wick everything evaporated. Before that, the AGV-80 stood, worked for 30 years and only then flowed, but the machine did not work for the last 10 years.

Now for a long time I was looking for what to replace the leaked AOGV and did not find anything suitable. Gas workers are forced to sign a Service Agreement, so imported boilers disappear (expensive maintenance). Lemax and S-Term with automation are at odds, users are complaining. It remains to try again with Borinsky.

There are no complaints about the work

A boiler leak after 3 years indicates a poor quality of metal or welded work, or all together.

Please tell me, during an outbreak, for some time it smells of gas, is this normal or a marriage?

Until I saw

It smells of gas!

It works normally in a well-made heating system. If you put it in the old system - it won’t last long, the heat exchanger will flow.

Attractive price, made "cheap and cheerful", nothing more. Normal design.

At least the bottom of the tank could be made thicker. You need to get used to popping when you burn the burner (but this is how Eurosit 630 works)

The flight is normal. The most important thing after 23 takes up little space.Water warms well (but you need to get used to it) a house of 76 m2.

takes up little space

price

For myself, I immediately decided that I would choose a boiler among domestic manufacturers. As a result, I stopped at the Borinsky boiler Ishma 31.5. Automation with modulation, the main thing here is to set everything up correctly and noise problems can be avoided. The boiler is floor and single-circuit type. Gas does not eat much, 3.7 m3 / hour. I always keep the heat exchanger at a temperature not lower than 60, thanks to this the boiler has been serving me for several years without complaints.

There is a piezo ignition function. The house is by the way a large 300 sq.m. and I don’t see problems with heating in winter. The boiler weighs a lot more than 100 kg, so delivery and installation will not be easy. Among other things, I want to add that it is much more profitable to buy our products: the cost is lower, it will not be difficult to get spare parts if necessary, and then you can find specialists using this technique. So, I advise you to buy Borinsky boilers.

Convenient, economical, domestic, no problems with spare parts

Heavy

I thought for a long time, but still installed in September 14, the Borinsky boiler AOGV-23, equipped with SIT automation. Bought it in his Norgaz. As for convenience, I did not really like the automation. When you start to set the minimum temperature in the off-season, the boiler begins to interpret, while making a sharp pop when the burner ignites. The boiler was installed in the kitchen, so I had to get used to this turn of events. The boiler is single-circuit and the water is heated separately, using a gas column.

The boiler capacity is 23.3 kW, installed in a house with an area of ​​150 sq. M., I took it with a margin, but it was possible to buy less by capacity. A domestic-made boiler, cost me 16,400 rubles. It weighs somewhere 55 kg, the dimensions he can not be called small, 994X403X463 mm. In principle, a normal boiler, you can get used to it.

not bad in performance

automation is not convenient

I use the ACHV 17.4 boiler for a very short time, but I have already managed to become disappointed in it. The model is floor and a number of inconveniences follows from here. The boiler draws dust into itself, stands on the floor, and dust will break faster. The burner is open, and because of this, dryness is formed in the house. Air in winter can only be obtained from the street, humidifiers do not save the situation at all.

Plus, the water in the DHW circuit manages to deteriorate overnight. There is a boiler after the boiler, and this black water gets into it, it turns out that it is simply impossible to use such water.

Another boiler puffs loudly when the burners turn on, and this is distinctly audible in other rooms. I also noticed nekrokras on the boiler, well, you yourself understand that it does not look comme il faut together. In general, I do not advise you, it is better to buy a wall-mounted boiler with a burner of a closed type and always from another manufacturer.

Drowns not bad

Noisy, poorly made, water deteriorates, dries the air, uncomfortable