Hammer drills

Perforator Bison in my toolbox for more than three years. I use it infrequently for such work, where you do not need long continuous work. He can punch a couple of holes in concrete easily and without problems, but nothing more. But for a major repair, I would not use it, because it is a purely household tool.

During the operation, I never had to contact the service center or change any spare parts. During operation, the punch does not overheat, but I remind you again - I do not force the tool, for a long and hard work I take a professional one. Of the advantages - it drills quickly, does not heat as much as others, it is convenient to hold in your hands - it does not slip.

The drawback that I noticed is even more simply a feature of the work - it is necessary to apply forces for drilling and crushing, although the manufacturer writes that the device works without any effort.

drills fast
does not get warm
does not slip.

use of physical force

Bought a year ago, on a stock in a large construction center, the Zubr ZP-800EK perforator. A month later, he made repairs in his apartment, where this puncher helped me a lot. For its small size, it has a fairly large impact force, which made me very happy (since I expected that its power would be like that of an impact drill). He punched a hole in the wall with 2 bricks, a puncher crushed bricks without much difficulty, he managed to install the hole in 15 minutes. Then I tested it for punching in a wall of concrete m-500, a niche 10 cm deep, the punch "showed itself" not badly, I removed the concrete, but with little effort.

I was very pleased with the presence of a clamping and an ordinary cartridge in the kit (I checked them in work, they hold perfectly, nothing can be turned on). Not superfluous, the spare brushes that come with the kit will turn out to work (usually they are erased at a time when the stores are not working). The only drawback is the grease that comes with the kit, it is not suitable for use, because it is too liquid and quickly erases. In general, I am very pleased with the purchase!

Powerful impact force, “rich” kit

Included is poor lubrication.

In place of my “devolt, who died in a fair battle (burned out due to a power surge), I decided to take a not expensive and high-quality punch. A friend working at a construction site advised me to take a Zub-Zp-800EK rock drill. I have been actively using these punchers for about a year, during all this time the puncher has never failed, although the load was very noticeable (punched vents in concrete walls). The most important thing is not to forget to lubricate it, grease can be found in any hardware store (200-250 rubles). I am satisfied with the purchase!

Reasonable price, excellent performance.

could make the wire a little longer.

For home use, the Zubr puncher is ideally suited. The first thing I want to note is the combination of price and quality. I have been using the puncher a little over a year, there are some complaints, but overall I am satisfied. Of course, you can not count on strong power, but again, 800 W for home use is enough. The tool kit is good, everything is in a convenient plastic case.

He worked as a puncher all summer, made a summer residence and repairs in the apartment. In addition to concrete, he drilled metal for them, although it was necessary to use it as a chipper only a couple of times. Not out of order, I use it to this day.

Do not expect anything more from him, I repeat that the tool is household. Naturally, he will be inferior to all the vaunted Makite. I think that I’ll work with this puncher for more than 1 year. If he nevertheless fails, I will not be upset. For such a price it is excusable.

Price, durability

Not found.

When we finally bought a new apartment, then as a host, I needed a hammer drill. Any person begins to remodel their apartment for themselves. Having assessed the condition of my new housing, I realized that it would be hard to work and hammer it here. And that you can’t do without a punch.

Going through the Internet, my choice stopped at the Zubr brand puncher. I chose an average model for myself both in price and in power. Powerful at home and not needed. My model has three operating modes, not heavy. I was looking for such a hammer drill.

Repair and all alterations were completed and were pleased with their work. My punch proved to be good. It is easy to drill, and hammering at least a brick partition, at least a concrete wall. And I gave him a good load. The bison survived all repairs and continues to serve as an assistant in the household. One drawback is modest staffing.

Load resistant

Low staffing