Hammer Hammers

I took it about 5 years ago for a small cosmetic repair in odnushka for 3000 rubles. Perforated household green. After that, he took up tightly on kolyma on an electrician. I don’t remember the smell of plastic, and not the point. in general, I calmly survived the grooving with a 20 mm meter drill, 68 mm socket boxes in 3 odnushki with sockets where it is possible and 2 three-wire ropes + along the way there were basements attics and other little things without socket boxes, except for the first apartment there were panel and a monolith. the ratchet worked perfectly when casting only when really needed. unlike makita of the same power. The power was about 3 J, it’s a little inconvenient to drill for a take-off, on the other side of the wall large pieces fall off. Recently, almost died, I think something fell apart in the gear judging by the sound. but in general he paid for himself several times. I also bought a hammer only more powerful, so that the socket would drill faster, for 3 years of warranty it would definitely pay for itself. makits of this kind are worth tens of thousands and I don’t know if they will pay for themselves.

price, impact power.

the impact power when drilling through, large pieces of the wall fly off from the back side, it’s heavy, but if you are a man weighing 80 kg it doesn’t matter. It is difficult to find parts and service where they do inexpensively.

Three months since I bought a hammer, although in fact I used it for only a month out of 3. The rest of the time he spent in the service. For this reason, talking about some advantages is not necessary in principle.

The blow disappeared on the second day after the purchase. On the third hole is 12 mm in the brick. I took it to the service. What they shamanized there for two weeks is hard for me to say. They did not take money and said that they had repaired it. Repaired, yeah. Enough for three days and 10 holes 8 in concrete.

The blow disappeared again. Now 3 weeks in repair. Took away. He stayed with me for about two weeks and needed to drill concrete again - 6 holes on the anchor and the blow disappears.

I handed over to the service and demanded a refund, since the third one is the same failure (it’s good that they are not different, otherwise FIG would prove that). But I was repaired and given to me again - work. Extremely dissatisfied, but I can’t hand over the marriage back.

Price, normal design, weight

The blow disappears regularly

I “got acquainted” with the Hammer PRT650A puncher when I started a small restructuring in the apartment. Our house is old, brick.The puncher was looking specifically for what he planned to do: drill 6 mm holes in the brick walls and ceiling (tile floors) to install drywall constructions (in other words, walls and partitions). The store consultant convinced that a hammer drill with a power of 600 watts would be enough for such purposes. The first thing that pleased Hammer PRT650A was the price.

Quite inexpensive, if you look at the analogues that I saw. The case is very convenient, the kit includes a handle, a stopper and spare brushes. This puncher can not only drill and hollow, but also only drill or just hollow, the reverse mode is provided (when the drill rotates in the opposite direction), there is a latch. For my work, its power was more than enough. I am satisfied with the purchase.

convenient to use, thick cable, reasonable cost.

it smells bad

I have been using the Hammer PRT1200 model for about 2 years. The hammer drill works all this time, without any glitches and breakdowns. It is convenient for them to work with only two hands, since the weight of this unit is quite heavy and it must be supported during operation. He drilled holes in the basement FS-kah, he drills quite quickly and efficiently (although he drilled with the usual cheap - a Chinese drill). Its only and rather significant disadvantage is the fact that the punch starts to get very hot in the first minutes of work, it seems to me that this will not negatively affect his further “life” (look later). In addition, it is very sad that there is no fixation of the rotation of the chisel. In general, I am satisfied with the purchased hammer drill!

low price.

there is no fixation of the rotation of the chisel.

I have long thought to buy a good hammer drill for home use. On the advice of a friend, my choice fell on the HAMMER PRT 800 C PREMIUM rotary hammer. For already 1.5 years I have been “tough” operating this “unit”. About the punch, I can say the following:

1. For such an optimal price, the assembly of the hammer drill deserves a solid 5. Everything is well screwed, not something that does not play and does not knock in the case. The shape of the case is very well thought out, nothing protrudes and does not interfere with the implementation of the work.

2. The hammer has a fairly powerful impact force (my old interskol "nervously smokes on the sidelines"). I sorted them out of concrete concrete at the dacha, figured it out in 30 minutes.

3. "Suitcase" from the punch, made of "flimsy" plastic. An empty case, fell from the table (height 1 meter), a crack went along the entire length of the case, which had to be sealed.

powerful hammer drill

weak case.