Greenhouse Uralochka

In the Uralochka classic greenhouses, very poor self-tapping screws and very poor polycarbonate covered in holes and bubbles refuse before it is too late, unfortunately in my case it is probably too late.

Pluses are few

They drove for a long time, not all arcs were brought instead of 5 4

all the same, they gave for a separate amount. Polycarbonate with a marriage called they said they were replacing, but there was no hope.

Ordered, paid, waited a long time, but installed. After 11 months, polycarbonate cracked. He phoned, reported that the carbonate had cracked, they said we would sort it out and call back. We call ourselves in a week, they say they have not figured it out yet. called a week later, explained, the guarantee is only on the frame, on carbonate because they are not a manufacturer, then there are NO guarantees.

The frame stands, rusts a little, but costs.

Polycarbonate is cracked, the manufacturer of carbonate does not give guarantees, well, or the manufacturer of the greenhouse installs polycarbonate, but it does not sound ..... The guarantee is only for the frame, and this is not the most expensive in design. It is painted, but screwed with self-tapping screws, and they and the chips give strong rust.

Until last year, the site was only homemade greenhouses made of wood and fittings. Every spring, something had to be patched, remodeled, blocked, and so on. Tired of it. My husband and I decided to buy a factory-made greenhouse. This model was chosen due to the fact that the neighbor has been using it for 3 years. They came to visit, examined, felt, listened and ordered themselves. The guys from the company from which they made the order collected. Collected very quickly, in almost 2-3 hours.

if everything is fastened together correctly, the structure comes out very durable, does not creak, does not stagger, it survived the first winter without loss.
It keeps heat perfectly, a good harvest is guaranteed;

After assembly, you yourself need to blunt and clean all sharp corners. There were a couple of cases when I got very scratched, and my husband cut himself on a polycarbon when stripping

Bought this year on the official website of the manufacturer's factory - "Neftekamsk Mechanical Plant". We ordered a greenhouse galvanized, arrived painted, although it costs less. Delivery itself was delayed for 2 weeks. At that time, when cucumbers and tomatoes were already planted in full in greenhouses and greenhouses at neighboring sites, we were just about to begin assembly.It was immediately evident that the assembly of the ends was done hastily. The door was glued to the frame with paint; they probably closed it with an unbroken one. In general, the paintwork is very unreliable. I feel there will be a lot of rust.

Many holes on the frame parts did not match or were smaller in diameter, had to be re-drilled. The door does not open as provided by the design. The movement is prevented by the fasteners at the end of the door.

robust and reliable construction to withstand heavy snow loads

full of minor flaws, poor-quality painting, disgusting service

In our region (eastern Kazakhstan) there is very heavy snowfall. Therefore, when choosing a greenhouse, the main parameter was its strength. We compared two models of the Uralochka and the Kremlin, both reinforced. Finally, they chose the urals on the recommendation of the seller, prices were comparable, so he hardly advised on greed. I summarize what I liked and what not

Tselkovye arc, although in transportation and uncomfortable, but much stronger than collapsible;
Ready ends, you just need to attach and drill polycarbonate

powder paint adheres very poorly. after transportation, in some places it departed a little;
The tape for fastening the polycarbonate was not enough, I had to finish it with screws;
Three men could not collect for 3 hours as they sang in the advertisement;
Many technological holes were not haptalo;
No seals for doors and window leaves;
Heaps only external, internal is not provided.

Last year, they bought a reinforced greenhouse "Uralochka", 6m long. with polycarbonate coating. We collected half a day if not more, and this is far from 1.5-2 hours, which the manufacturer promised. As the sellers advised. The most important thing is to install the frame of the greenhouse on the foundation in terms of level, without distortions. The base is made of bricks, despite the fact that the site has a slope, everything was leveled to the level and the ground under the foundation was rammed.

Durable and airtight construction

The design of the greenhouse, of course, is reliable and simple, but made disgustingly:
There are no holes in the base;
The arcs are not fully dressed;
Horizontal guides are not inserted into each other, had to be lapped, which slightly warped the entire structure;
It is very difficult to lay polycarbonate sheets tightly.
For assembly, you need a bunch of everything: a jigsaw, a drill, screws and a lot of time and patience

The greenhouse Uralochka is already my second. I bought the first one in 2011. I can’t get enough so far. Anticorrosion coating of varnish on a high-quality primer. It still stands without a hint of rust. Although the neighbors' similar greenhouses of other manufacturers rusted quite a bit. When the question arose of buying a second greenhouse there was no doubt. As it turned out in vain. Over the past 5 years, the manufacturer has greatly reduced the quality of products. Factory painting poor quality. Paint peels off. Accessories are either from another model, or made after the sleeves.The plates for connecting the base of the wrong model had to be re-drilled. Changes in the design made by the plant on the rigidity of the frame and the overall strength, in my opinion, have no effect. Longitudinal ties from a square pipe, replaced by a round with butt mounting.

sealed, maintains temperature

Compared to the previous model, the quality of the design has greatly decreased.