Hammers Interskol

From the line of punchers, the price attracted, the second perf was not asked for a housewarming

Lower Brand Price

I have 2 perforations with the same failure, the washer in the cartridge crumbled after 3 months of inactive use, no one carries parts in our city. The power cord is covered with poor-quality insulation, breaks in the cold. The fact that it is heavier and warms faster is trivial

I liked the ratio of price and quality - in the case of Interskol it, in my opinion, is one of the best. Plus, the guarantee goes to the tool large enough, which also can not but rejoice

quality

few accessories

The best punch for home. With sufficient power, it is very compact thanks to its vertical layout. With it, you can easily punch a 3/4 pipe hole from the kitchen to the bathroom, dodging in a cabinet under the sink. This was just what I had to do when we started repairing the plumbing. With any other unit, I would have to disassemble half of the kitchen set. Or lift the bathroom.
The impact drill replaced immediately and forever. Already drilled a couple of dozen holes for dowels in brick and concrete.

Of the chippers, so far only the walls in the bathroom and toilet (brick) and four through holes for the cable (antenna and Internet) in the concrete walls in the rooms have happened.

And he has yet to meet with the rest of the chipping work: this summer we plan to capitalize on the entire apartment.

Powerful, compact, good case, 3 modes of operation

A little expensive

I have a special attitude to rotary hammers. I’ve been working with this type of tool for ten years now. I tried different models and different manufacturers. There is something to compare. Recently acquired a P-26 / 800ER-2 punch. I want to share some nice improvements in the design. First of all, I was pleased with the punch mode.
Whoever professionally drills holes in series, he will understand how sometimes you have to tap a tool in order to switch from idle to working mode. Especially when you are hanging on a stepladder and holding the perf with one hand, and he just spins and does not hammer. Just so many kind words are recalled. And at this perfo to start the impact it does not need to be pressed strongly. In vertical drilling, the weight of the tool itself is sufficient. If the ceiling is drilled, then a hole can be marked on rotation, and then, with a light touch of a tool, add a beat to the rotation. This is especially true for monolithic floors. When drilling walls, you quickly get used to the effort at which the blow is connected. The tool is very responsive in punch mode.

The second pleasant moment was the tenacious button. It used to be a chronic disease of medium power rock drills. For the year had to change at least two buttons. So far, pah-pah-pah, there was not even a creep to the burning.

In general, a good affordable model of a professional tool.

Price, power, good responsiveness in perforator mode, reliable button

Not yet revealed

I work with this puncher for concrete, stone, brickwork. Often, crowns have to make holes for ventilation, socket boxes, and perform demolition work.
Powerful hammer drill with SDS-max, for heavy laborious work.

They had to break out doorways, break down partitions, plaster, knock down tiles, lift the screed - it works like a chipper. Not for flimsy people, I tell you, a rather serious heavy machine, although it looks compactly tailored, but not everyone can hold it during long work.

I liked the opportunity to change the drill speed and impact force, gradually increase or decrease if necessary. The safety clutch is also a good thing, more than once it saved my hands from pulling out if the drill accidentally jammed. He showed himself on the good side for continuous monotonous loads.

Durable, powerful, quite compact for 8 J, inside the metal, the barrel can withstand decent loads, two modes: rotation and bump, built-in ability to change the drill speed and impact force, elastic rubber cord

Too heavy

This puncher has been working for me on installing doors for almost 2 years. I make them several dozen holes a day in different walls - concrete, monolith, expanded clay concrete, brickwork. Great working machine.
I like the SDS plus axle box automatic, instant change of the Boers, without unnecessary gestures. I buy consumables of only good quality, he does not like bullshit, bites.

It’s convenient for me, the weight is suitable. It would be harder - it’s already inconvenient to keep weight above the level of the chest. As for me - the perfect value for money.
His native case is cramped, otherwise there are no complaints yet.

Price, reliability, axle box SDS plus automatic, weight, power, impact energy

There’s nothing to complain about, I wrote about the case that it’s too small

Since repairs are expensive in and of themselves, and building material prices are constantly rising, we decided to remodel the layout of the apartment ourselves. The question arose about acquiring our own hammer drill, and here, as always, the Internet is to help. I read an infinite number of comments and reviews, as I thought the purchase would be one of the most expensive, but I saw the praised model of the Interskol punch at a very attractive price.

Thanks to skillful marketers, my opinion of a cheap product is not the best. But he took a chance and bought it, because the deadlines were running out, it was necessary to start hammering the wall.
I liked the fact that the punch turned out to be quite light - about 3 kg. And the coating on the handles, not allowing the tool to slip when working without gloves.

Gouged the wall without any problems. Since I often smoke, the punch did not work for more than half an hour, I had to constantly rest. Then I read in the instructions that it is necessary to work like this, since the household tool is not designed for long-term operation, it must be turned off during heating.

In general, the unit justified my confidence in domestic manufacturers.

long cord, reverse function, price, rugged case

not detected

For about three years now I have been engaged in private apartment renovation. Recently decided to buy a new hammer drill. Following the advice of more experienced colleagues, I chose Interskol P-26 / 800ER. First of all, because the price was fine. Two times cheaper than the similar BOSCH model.
And also liked its versatility. But all this is only according to the description and reviews. I prefer to try first, then evaluate.
Three months have passed. I use a punch almost every day.

At high power (800 watts), the weight is only 2.9 kg. You can safely hold it with one hand, which is very convenient for working without assistants. Drilling concrete is so easy that even at first it seemed that it fell into the void. When I worked in a prefabricated house, I thought there would be problems, but here everything turned out fine. And now the screwdriver is no longer needed, I also do this work with the help of a puncher. In general, I can now say that I am satisfied with the choice. For a small price received an excellent tool.

low price, convenient, high power, long quality cord

heats up quickly

A couple of years ago, he made repairs in the apartment, and without a hammer there was nothing. After some deliberation, I decided to take Interskol P-24 / 700ER, and obviously was not mistaken in the choice. Of course, this is not an industrial model, but with home use it pays off at 100%. The model I bought was mainly designed for percussion drilling, but I also used it to shatter walls

My apartment is in a monolithic-brick house, the brick was ditched without problems, I had to give a break on concrete. As for drilling, I drilled 10 mm holes in concrete and worked with a crown for socket boxes. There were no stops at all, the punch was heated very little. There is a reverse on the button, so I used it as a screwdriver, my hand was a little tired (weight 2.7 kg), but this is a matter of habit.

The disadvantages include the fact that the automatic clip holder sometimes sticks, but if you constantly lubricate the shanks of the nozzles, then there should be no problems. In my opinion, the case is rather fragile, so it worked carefully, without fanaticism.
For two years, I changed the brushes and the power cord, there were no more breakages.