Frap Faucets

Frap taps have been in my bathroom for five years. For all this time not a single gripe about work. No leaks, chrome peeling and broken components. There was one problem, but it was related to water quality. I had to remove the mixer, clean the channels from the scale (I suspect that the khan came in with the strainers at the inlet), blow through and put everything back in place. And he works on as if nothing had happened. The case is made of real brass, no sinks have been noticed, the channels and seats are even. For my money, this is a really solid Chinese :-)

They have been working faithfully for five years.

For all the time of operation is not noticed.

Two weeks later, water began to seep under the fastening of the nut under the gander, which rotates. Quality at zero. I ordered another gander.

Very great design, black, not easily soiled. Fits beautifully into the interior of the kitchen.

Gaskets are of very poor quality. We must look for more dense and not plastic.

We bought a mixer of your company, a month later I began to let water pass in the place where the neck turns, I don’t know what to call it right. The coating broke off and rusted through, now water oozes through these holes and after a month of use, when they came to the store after a month of use, we were told that the guarantee is 2 weeks on the check, now 6 months have passed, you can throw it out. If you want with me contact, my mail is maniashka_87@mail.ru

Not

I have already written

I bought a faucet in the bath. It has been working for 5 years. It has transported excellent flotation of water to different apartments to enjoy. I was pleasantly surprised when I found out that this is a Chinese production FRAP.

It works flawlessly.

not

The first Frap faucet for the bathroom I bought at the end of 2014, just when the dollar was jumping, I managed to buy at the old price a little less than 1000 r. In August 2016, the mixer body burst at the seam, almost flooding the entire apartment. I ran to the store urgently to buy another faucet, and here the ambush - the brand of the one that burst, of course I did not remember, but there was no time to look (the brand by this manufacturer was very thoughtfully applied on the side of the mixer that faces the wall !!!)) )). In the store, the seller, at my request, bought better quality, but not very expensive faucet, immediately began to praise the brand Frap !!! I also thought - something familiar ... When asked what Frap is good - the seller said that this manufacturer only makes real reliable bronze cases - not that cheap China from silumin, which, like, was me, and therefore burst. Persuaded the bastard. The price of the mixer was already 2600 rubles. What were my surprise and anger when at home, unscrewing the bursting faucet, I saw on it the same brand - Frap !!!! See the photo of the bursting mixer here: https://drive.google.com/open?id=0B4UcGDC3tgoxVFBwZlR1OWpFU00

Since there was no water in the whole house for a couple of hours (opening cranes in the apartment could not be closed and the whole house had to be turned off), there was nothing left to do but put the purchased mixer, in the hope that, suddenly, the last time I came across a defective one and that this time I'm lucky. Nifiga no luck! Exactly six months later, water began to smoke from under the handle of the mixer - the cartridge dripped. I had to turn off the water again and rush around the city looking for a suitable cartridge - found only in the third store.

Bottom line: never buy Frap brand taps! - at least throw money away and have unplanned hemorrhoids with repair or replacement of the mixer, as a maximum - you risk scalding yourself and to the heap - pour the neighbors from below!

When I bought the first mixer - the price could be called a plus. When I mistakenly bought the same brand again - there were no pluses!

Terrible quality, fragility, unreliability. danger of operation (can be scalded if the case bursts).

On the sink in the bathroom, the faucet broke, I had to urgently buy a new one. I chose only among budget options, as a result I bought a mixer from Frap, model H02 F1002-B. It cost 750 rubles.

The case is covered with chrome plating, it looks nice. Fasteners and connections for water were sold along with the mixer. Installed by myself, there is no need for a great skill.

What I don’t like is the noise made when the mixer is turned on, you turn on the water and the feeling that a car is passing by. How many faucets used to be, there was no such problem with any. I used Frap H02 F1002-B a little more than a month, and then took it under warranty to the store, as the mixer began to leak. Well, the warranty is valid for a year. Exchanged for another model, which was slightly quieter than the previous one, I hope at least the new one will last longer.

price, type

the quality is poor and the mixer is noisy during the water supply

There used to be a terrible and outdated mixer (both in design and in characteristics) at home, it was inconvenient to use it, and I decided to change it. Among a huge number of options, I chose Frap F512-1 - a touch mixer equipped with an infrared sensor.It seemed to me at that time that it would be a pleasure to use it.

It is made of brass, and chrome plated on top. The installation is simple, the mixer is mounted tightly in the hole in the sink. It works from the mains and from the batteries, so if the lights are turned off and there are no batteries, we are left without water.
Using it in everyday life was inconvenient, for example, when you need to draw water, the sensor simply does not work. You have to constantly wave your hand near the faucet, but believe me, this is not very convenient. I do not advise it is impractical for a home.

- Hygiene;
-Original and modern;
- ease of installation;

-Works only if there is movement;
- Mandatory presence of an outlet nearby;
-No electricity - no water;
-Mixes water to exit;
-Not practical.

For a very long time we were simply unlucky with faucets; we changed them almost every half a year. What just didn’t happen to them: they broke, gaskets flew due to which there was a leak, rusted.

Bought both domestic and Chinese. The last time I turned to a relative to help in choosing a mixer. He just advised taking Frap, the model was chosen together and stopped at F2230-4. It was by the way more than 3 years ago.

During this time of operation, only the mesh was removed, it was constantly clogged and there was a lot of trouble with it. Mixer material - brass with copper. Ceramic cartridge, designed for 500,000 switching, after which it will have to be changed. The faucet has a chrome coating on top, it is easy to clean and looks great. It is cleaned quickly and easily with any plumbing cleaner. Rust appeared, but not in visible places.

High-quality, reliable and practical mixer

Rust appeared

Of course it was stupid to buy that if I buy a mixer for 500 rubles, made in China, I will get high-quality and at the same time practical product. Well, what can you do now, this is how the mixer from the manufacturer Frap H19 F4119 appeared in my kitchen. Outwardly, of course it looks normal, convenient to use. The Frap H19 F4119 mixer was packaged in a textile bag with the manufacturer's logo. As for quality, things are very bad here. Already on the third day after installation, the Frap H19 F4119 mixer began to leak.

I immediately realized that for a long time it would not be enough. Hand it back, you may need expertise, and this again is a waste of time. So I decided that I would not bother because of 500 rubles, I would only spend time and nerves. I do not advise buying cheap Chinese Frap, it doesn’t smell of quality there, money is wasting.

Cost

Started to flow on day 3

Frap F2125 was chosen as a mixer for shower and bath. It was made in China, but here I will make a reservation - this is a factory product. A guarantee is promised 4 years, and the total term of use reaches 10 years. There is weight, brass is present. The heads and cartridge are made of ceramic. I chose a two-valve mixer, I like it more. The heads are made in the form of crosses, rotate smoothly and easily.

The shower switch is made in the form of a lever, it works and rotates well, smoothly and without unnecessary effort.The spout can be rotated 180 degrees, convenient especially when you take a bath. The spout is 20 cm long, it is enough just right. At the end is an aerator. The length of the hose is 150 cm; it is made of braided chrome-plated brass. It is a little short, there is a slight inconvenience when using it. Watering can is simple and convenient.

Cheap and high quality

Short hose